Oki 5050 manual Lift the document table into an upright position

If your OKIFAX displays “TONER LOW” or “REPLACE TONER CART.,” replace the toner cartridge with a new one soon. If print density is high enough, you can continue to to use the toner cartridge without replacing it until print quality becomes unacceptable. Keep in mind that if you don’t replace the cartridge soon, there is a risk that a fax will be unreadable when it prints using an empty cartridge.

If the print density becomes low even before your OKIFAX displays “TONER LOW” or “REPLACE TONER CART.,” gently wipe the lens surface of the LED array (see Step 8). If the print density does not improve, replace the toner car- tridge.

Warning: Be careful when handling the toner cartridge. Do not let toner spill on your clothing or other porous materi- als. Use cold water to clean up spilled toner; hot water causes the stain to set.

1Lift the document table into an upright position.

2	6
	5
	#
7	0

64Problem Solving

2Push in the cover release buttons on the side of the copy stacker until you hear a click. Lift the copy stacker.

2	6
5
4
	0
*

3Pull the blue lever on the old toner cartridge all the way toward you. Carefullypull the old toner cartridge out of the image drum unit. Dispose of it in the plastic bag you received with your new cartridge

	3
	2
1	9
4	8
	7
	*

4Remove the new toner cartridge from its package and gently shake it from side to side to distribute the toner. Then carefully peel the white plastic tape from the bottom of the

toner cartridge.

Of5050hw.pm6 64 4/15/98, 9:38 AM