Oki 5050 manual Faxing Dial Directories

3On the numeric keypad, press the # key. The display shows GROUP SETTING.

4Using the numeric keypad, enter the two-digit group number you want to program. You can use numbers from 01 to 10.

5The display shows the number of your current group and SELECT LOC.(S).

6You can now add a location to your group (or delete a location from it). Refer to the instructions below.

To Do This	Use
Add a One Touch	Press the One Touch key.
location	Press Yes ◀ to add it to the group.
Add an Auto Dial	Press Auto Dial. Enter the 2-digit Auto location
	Dial number. Press Yes ◀ to add it to
	the group.
Delete a previously	Press the One Touch key. Press No ▶ added
One Touch	to delete it from the group.
location
Delete an Auto Dial	Press the Auto Dial key. Enter the 2-digit
location	Auto Dial number. Press No ▶ to delete
	it from the group.
Search for a location	Press the Search key continuously until by name
to add or delete	the location you want appears. Press
	Yes ◀ to add it to the group.
	Press No ▶ to delete it.

7After you have completed your selection by pressing Yes ◀ or No ▶, the display shows SELECT LOC. again. Continue to add or delete locations from your group. Each group can contain up to a maximum of all of the One Touch and Auto Dial locations available on your OKIFAX.

8When you are finished programming your group, press the No ▶ key. The display shows LOCATION PROGRAM- MING.

9To program another group, go back to Step 3.

If you are finished, press the Select Function key.

Faxing: Dial Directories 31

Of5050hw.pm6 31 4/15/98, 9:32 AM