Oki 5050 manual Safety

Safety

Installation Hints

■Install your OKIFAX 5050 in a dust-free location away from direct sunlight.

■Do not plug your OKIFAX into a power source shared by equipment which produces electrical noise (i.e., air conditioners, etc.).

■Leave electronic adjustments to authorized service personnel.

■The LINE terminal connects your fax machine to a standard telephone line. To avoid damage to your telephone system or to the OKIFAX, do not plug your fax machine into anything other than a standard RJ-11C jack.

■Your OKIFAX is intended to be grounded electrically and is equipped with a three-wire grounded power cord. For your safety, do not attempt to defeat your power cord’s grounding plug.

■The power outlet should be located near the equipment and should be easily accessible.

■The TEL port on the back of the unit is only suitable for 2-wire devices. Not all standard telephones will respond to incoming ringing when connected to an extension socket.

■This equipment may not necessarily provide for the effective hand-over of a call from a telephone connected to the same line.

Operation and Maintenance

■Use a dry cloth to clean the control panel and the main body of the unit.

■Aside from replacing the toner and image drum cartridge, do not disassemble or attempt to service this unit yourself. Refer to a qualified technician for service.

■Pull out the AC plug before trying to remove any objects that may have fallen into the machine.

■If the unit becomes physically damaged, disconnect the power cord immediately and arrange for its repair or disposal.

OF5050M.PM6 7 4/15/98, 9:23 AM