Oki 5050 manual Result codes indicate the results of communications

Page 71

Power Outage Report

Certain information stored in your OKIFAX is lost if power is interrupted under these circumstances:

If there is no optional memory expansion board installed.

If there is optional memory installed, but power has been interrupted for more than one hour.

In these cases, any documents stored in the OKIFAX’s memory are erased.

If this happens, a report automatically prints listing all messages lost because of the power outage. It includes all faxes received into memory but not printed—most commonly faxes in confidential mail boxes and faxes not printed because there was no paper in the machine—the date and time they were received, and Sender ID. It also lists faxes in memory waiting to be sent, when they were scheduled to be sent, and the intended recipient.

The information in this report can help you identify and reconstruct any documents that were lost.

Codes Used in Reports

Result Codes

Result codes indicate the results of communications.

Code

Description

BUSY

The other machine’s line was busy or there was no answer.

CANCL

A message was erased after being held in memory for 10 days.

COMP.

A multiple-location transmission was completed.

COVER

The cover was opened during the communication.

NO

The transmission or reception failed.

OK

The communication was completed successfully.

PUNIT

This error code indicates a problem with the printing unit.

 

Contact service—page 78.

R_JAM

A paper jam occurred in your OKIFAX while it was receiving

 

a fax, and it was unable to receive the entire message

 

in memory.

S_JAM

A document jam occurred.

STOP

The Stop key was pressed, ending the communication session.

Communication Codes

Communication codes indicate the communication mode used for a communication.

Code

Description

B.C.

Multiple-location transmission (broadcast).

BOX

Reception into a personal mail box.

CALLING

A communication initiated by your OKIFAX

CALLED

A communication initiated by a remote fax machine.

 

Faxing: Reports 59

Of5050hw.pm6

59

4/15/98, 9:32 AM

Image 71
Contents Okifax Okidata Federal Communications Commission Requirements for End Users FCC Telephone Consumer Protection Act OF5050M.PM6 15/98, 923 AM Industry Canada Radio Interference Statement Safety Toner Cartridge Image Drum Unit Handling Manually Direct AccessContents Faxing Advanced Operations Index Introduction See page 75 for ordering information What You Should Receive Component IdentificationComponents Jack for connecting to an outside telephone line Control Panel Control Panel Keys and Indicators Introduction Introduction One Touch Keypad Signal Tones Installation Take out the image drum cartridge Replace the image drum cartridge Close the document table Okifax Connect Power Loading Paper 3CLOCK Adjustment Setting the Answering Mode 4SYSTEM Data PRG User Language Setting the LanguageConnecting to a PBX Copying To stop the copying process, press the Stop key # OQZ Faxing Dial Directories One Touch Parameters Chain Dialing Programming Groups Faxing Dial Directories Faxing Basic Operations Loading Documents Your documents are now ready for faxing or copying Shortcut Fax Number Programming Receiving Faxes Manually Receiving Faxes in Memory Power Failures and Memory Lift the handset and press the Hook V Request key Faxing Advanced Operations Select a location. Refer to the following instructions Cation Cancel Press the Start key. Your Okifax begins sending the fax 5MAIL Password PRG RX MSG Enter Relay PasswordRemote List no Waiting to be Polled Polling RX, Select Location Customizing Okifax Customizing Distinctive RING, SET Setup FAX Ring Call FAX Number NOWFunction no Not used Changing Your User Function Settings Dial Parameter Settings 2DIAL Parameter Understanding Reports Fax ReportsPrinting Reports Broadcast Confirmation Report MCF Result codes indicate the results of communications Problem Solving Push the buttons on the side of the copy stacker until you Of5050hw.pm6 15/98, 935 AM Printing a Cleaning Lift the document table into an upright position 15/98, 941 AM Change Drum Soon Message Push in the cover release buttons on the side of the copy 0213 FAX No Paper FAX Replace Paper Replace Toner Cart Problem Solving Problem Solving Problem Solving Service and Support Limited Warranty Okidata Service Locations ITU-T G3 SpecificationsBusy Tone Detect IndexAuto Start Dial Prefix Incoming Ring ONE Touch Param Redial Tries Printer AlarmTimer Prog Ring Response 51TSI/CSI Material Safety Data Sheet Appearance and odor Black granules, no odor Small Spills
Related manuals
Manual 2 pages 18.4 Kb

5050 specifications

The Oki 5050 series is a highly regarded line of color LED printers known for their versatility and exceptional performance, catering to both small and medium-sized businesses. This robust printer series is designed to deliver high-quality color printing while maintaining cost-effectiveness.

One of the standout features of the Oki 5050 is its digital LED technology, which combines advanced imaging capabilities with a reliable and compact design. This technology utilizes LED lights instead of laser beams to produce crisp and vibrant color documents. As a result, users benefit from faster print speeds, reduced noise levels, and minimal maintenance requirements. The Oki 5050 offers print speeds of up to 28 pages per minute for color documents, ensuring that overwhelming workloads are handled efficiently.

The printer is built to accommodate various media types and sizes, including envelopes, labels, and various paper weights. The Oki 5050 can manage media up to 220 gsm, providing users with the flexibility to produce everything from professional business cards to glossy marketing materials. The automatic duplex printing feature enables users to print on both sides of the paper, thereby reducing paper consumption and saving costs.

Another significant characteristic of the Oki 5050 is its high-resolution color output, with a print resolution of up to 1200 x 600 dpi. This quality ensures that graphics, images, and text are rendered with precision and clarity, making it a perfect choice for marketing teams and businesses that require high-quality print materials.

The Oki 5050 is equipped with user-friendly features, including an intuitive control panel and a straightforward setup process. It supports various connectivity options, including USB, Ethernet, and wireless capabilities, allowing for easy integration into existing office networks. This flexibility enables multiple users to access the printer simultaneously, enhancing overall productivity.

In conclusion, the Oki 5050 stands out as a reliable and powerful printing solution for businesses looking to achieve high-quality results without compromising on speed or cost. With its impressive features, advanced technologies, and adaptability to different media requirements, the Oki 5050 is an excellent investment for any professional printing environment. Whether for everyday printing needs or more specialized tasks, the Oki 5050 meets and exceeds expectations, making it a trusted choice for users seeking efficiency and quality.