7Enter the Location ID. This is a descriptive title up to 16 characters long. Refer to the instructions below.
To Do This | Use |
Enter numbers | Numeric keypad (press once) |
Enter spaces | Space One Touch key |
Enter hyphens | Hyphen key |
Enter alphabet characters | Locate the character you want on the numeric |
| keypad. Press that key repeatedly until the |
| character appears in the display. |
Enter a unique character | Press the 0/Unique key repeatedly until |
| the character you want appears in the display. |
| The following characters are available: ! # & ‘ ( ) |
| * + , |
Enter two successive | Press the No ▶ key to move to the next |
letters/numbers on | character. |
the same key. |
|
Move the cursor to | Yes ◀ and No ▶ keys |
make corrections |
|
8Press the Start key. The display shows
NO=<OR LOCATION> for about three seconds.
9Enter the optional alternate fax number, if desired. Refer to the instructions following Step 5.
1 0 Press the Start key to finish programming the One Touch key. The display shows LOCATION PROGRAMMING.
1 1 To continue programming One Touch keys, go back to Step 3. If you are finished programming, press the Select Function key.
28Faxing: Dial Directories
1 2 Lift off the plastic cover above the One Touch label. Using a pencil, write in the location name for your One Touch key(s). Then replace the cover.
One Touch Parameters
If you are experiencing problems communicating with a remote location in a very noisy telephone area, set up a One Touch key for that location and try turning Echo Protection on for that One Touch key. This helps the ma- chine overcome noise and echo problems on the phone line.
See the Problem Checklist sections for other suggestions.
1Press the Select Function key.
2Press the 9/User Program One Touch key.
The display shows 1:FUNC. PROGRAMMING.
3Press the Yes ◀ key.
The display shows FUNCTION NO. [ ].
4Using the numeric keypad, enter 23.
The display shows 23:ONE TOUCH PARAM YES [OT] NO[▶].
5Press the One Touch key for the location whose settings you want to change. The display shows ECHO PROTECTION, [OFF].
6Press the No ▶ key to switch Echo Protection on.
7Press the Yes ◀ key to confirm your selection. The display shows 23:ONE TOUCH PARAM. [ ].
Of5050hw.pm6 | 28 | 4/15/98, 9:31 AM |