Connecting handset
(IPF¦525, IPF¦555)
Plug one end of the spiral cable into the socket on the tel- ephone handset. Put the other end into the socket at the device bottom marked with ) symbol.
Connecting the Mains Cable
CAUTION!
Mains Voltage at the Site of Installation!
Check whether the mains voltage of your device (indicated on the type label) matches the mains voltage available at the setup location.
Insert the mains cable into the connection located on the rear side of the device. Plug the power cable into the elec- trical outlet.
EN
Connecting the Telephone Cable
Notice
Analogue Fax Machine
Your device is an analogue fax device (Group 3). It is not an ISDN device (Group 4), and there- fore it cannot be operated directly on an ISDN connection. In order to do this, you need either an analogue adapter or a connection for ana- logue terminals.
Connect the telephone cable to the device by inserting it in the socket designated with LINE
Inserting Ink Cartridge
1Open the control panel, by lifting and folding it up in the centre. Click the control panel completely in place.
2Open the cartridge compartment by pressing on the upper right corner of the document holder (arrow) and then carefully lifting it backwards. Click the document holder completely in place.
Notice
Connection to Private Automatic
Branch Exchange
If you connect your device as extension to a tel- ephone system, you must set it for working as an extension (also see Chapter Telephone connec- tions and additional devices, page 33).
Initial Operation · Connecting handset | 9 |