Sanyo DS36930 manual TV Adjustment and Setup, HOW to Operate the ON-SCREEN Menu, Setting the Clock

TV ADJUSTMENT AND SETUP

QuickTips

■The menu will display on the screen for approximately 20 seconds. Press MENU again to redisplay.

■Use the CHANNEL

▲/ ▼ keys and the

VOLUME – /+keys to navigate through the menus and to make selections from the menus.

■ To see the time

The on-screen menu provides the viewer with easy access to adjustments and settings. Just use the keys on the remote control and follow the on-screen instructions.

HOW TO OPERATE THE ON-SCREEN MENU

1.	Press	MENU key.		▲▼ keys	– + keys
2.	Use the	▲ /▼ keys to highlight	the	Clock	➧Manual	Auto
				Audio	➧Stereo	Mono	SAP
	desired feature.
				Picture/Sound	➧Sports	Movie
3.	Use the	– /+keys to choose desired			News	Manual
				Initial Channel	➧OFF	ON	C---
	option. (	➧indicates selected item.)		Antenna	➧Cable	VHF/UHF
4.	Press the	MENU key to exit.		CH. Search	➧NO	Start
				CH. Scan Memory	C 34	Added
Items with submenus requires additional				Aspect Ratio	➧4:3	16:9
steps.				Scan Velocity	OFF	Low
						➧High
				TV Speakers	➧ON	OFF
SETTING THE CLOCK				Audio Output	➧Fixed	Variable
				Menu Language	➧English	Espanol
						Francais

of day after setting

the clock, press the

DISPLAY key.

■ Extended Data

Service (XDS)

To use the Auto Clock feature, a local PBS station that is broadcasting an XDS signal must be received. The Auto Clock searches for the transmitted signal and automatically sets the clock. (This may take several seconds.)

Press MENU key for adjustment

▲▼ keys – + keys

signal may not be

transmitted by all

broadcasters.

■ Under weak stereo

signal conditions, you

may receive better

quality sound in the

“Mono” position.

Need help?

Visit our Web site at

www.sanyoctv.com

or Call 1-800-877-5032

To set the clock automatically Clock Manual ➧Auto

1.	Press	MENU key.
2.	Use the	+ key to activate	Auto setting.	Auto Clock Setting

Press MENU key to cancel

Notes:

–The clock will be cleared after a power interruption. When power is restored, the TV will display the Auto Clock setup menu on the screen automatically.

–Cable Box and Satellite users must set the clock manually.

To set the clock manually
1.	Press the	▲ or ▼ key to select Clock.			▲▼ keys	– + keys
2.	Press the	+ key to choose	Manual, if
					Clock	➧Manual	Auto
	necessary.					10:30
3.	Use the	– key to set the hour and the		+ key to set the minutes.

SETTING AUDIO MODE

Select desired sound setting, Stereo, Mono, or SAP (secondary audio program). Note: Stereo and SAP must be part of the broadcast signal.

1.Choose Stereo,Mono, or SAP from the Audio options.

Note: The TV will automatically reset to stereo if unplugged or a power failure occurs.

▲▼ keys – + keys

Clock

Audio ➧Stereo Mono SAP

12