Sanyo DS27930 Scan Velocity Adding or Deleting Channels, Aspect Ratio, TV Speakers, Audio Output

QuickTips

■Channels deleted from scan memory can be selected with the number keys.

■Restoring deleted channels, use the on-screen menu to manually add channels or start CH. (Channel) Search from the menu. It may take a few minutes to search thru the available channels.

OR

■Press the RESET key twice.

Need help?

Visit our Web site at

www.sanyoctv.com

or Call 1-800-877-5032

SCAN VELOCITY

ADDING OR DELETING CHANNELS

1.Press MENU key.

2. Use the ▲ /▼ keys to highlight CH. Scan Memory.

3.Press the + key to highlight channel number entry area.

4.Enter the channel number you want to add or delete (example): C34. For cable channels

above 99, press and hold the		1 key until C1– – appears. Then enter the other two numbers.
5.Press the	+ key to change the present setting.
			CH. Scan Memory	C 34 Deleted
Example: Added will change to Deleted. This			Aspect Ratio
			Scan Velocity
takes about three seconds. During that time, the
			TV Speakers
word “Added” or “Deleted” will become yellow.
			Audio Output
6. Use the 0~9 or ▲▼ keys to choose other channels			Menu Language
			Select channel using ▲ ▼ , 0~9 keys
to delete or add, or press the		MENU key to exit.
			Press MENU key to exit

ASPECT RATIO
Use this feature when digital equipment is connected to
the component input jacks. The 4:3 setting is for normal
				Aspect Ratio	➧4:3 16:9
viewing. The 16:9 setting changes the picture image to
				Scan Velocity
wide-screen viewing with minimal portion of top and
				TV Speakers
bottom compressed.
				Audio Output
1.	Press MENU key.			Menu Language
				Press MENU key to exit
2.	Use the	▲ /▼ keys to highlight Aspect Ratio.
3.	Press the	– /+keys to select	4:3 or 16:9.

This unit features an electronic circuit that regulates the scan speed of the electron beam creating sharp transitions between the light and dark portions of the picture. The result is crisp edges and sharply-defined clarity.

1.Press MENU key.

2.Use the ▲ /▼ keys to highlight Scan Velocity.

3. Press the – /+keys to select Off,Low, or High.

Scan Velocity OFF	➧Low
TV Speakers		High
Audio Output
Menu Language

Press MENU key to exit

TV SPEAKERS

1.Press MENU key.

2.Use the ▲ /▼ keys to highlight TV Speakers.

3.Press the – /+keys to turn the speakers ON or OFF.

Note: Sound will not be produced through your TV speakers if the OFF mode is selected.

T V S pe a k e rs ➧O N OFF

Audio Output

Menu Language

Press MENU key to exit

AUDIO OUTPUT

This convenient menu option enables you to select a fixed or variable audio signal.

1.Press MENU key.

2.Use the ▲ /▼ keys to highlight Audio Output.

3. Press the – /+keys to select Fixed or Variable.

Fixed Mode (Constant audio output level from TV)

Use external equipment’s volume control to adjust sound level.

Variable Mode (Output from TV varies with volume)

Use the TV and external equipment’s volume controls to adjust the sound level.

TV Speakers

A u d io O u tpu t Fixed ➧V a ria ble

Menu Language

Press MENU key to exit

14