Sony FR 20 manual Audio and visual indicators, Low Battery indications in the headset

Page 7
Low Battery indications in the headset

3. To end the call, press shortly the When using a mobile: on the headset.

Consult your mobile phone’s user guide for alternative ways of switching a call to your headset using the mobile phone’s key pad.

To switch from using the headset to the mobile phone during a call:

1.Transfer the call by pressing Using a desk phone: on your headset for 4 seconds until you hear a series of high to low tones.

2.Wait for instructions in the phone’s display and then re-activate the call by pressing the Yes/Call button on the mobile phone.

3.Continue the call on the handset.

4.To hang up, press the No/End button on the mobile phone.

Note: The headset remains on and is ready for new calls.

Low Battery indications in the headset

When using a mobile:

1.You will hear warning beeps approximately 5 minutes before the battery runs empty.

2.If you have continued your call and the headset switches off, the call can be re-activated on the Yes/Call button on the mobile phone (follow instruction in the mobile phone’s display).

Using a desk phone:

1.You will hear warning beeps approximately 5 minutes before the battery runs empty.

2.If you have continued your call and the headset switches off, the base will hold the call for 20 seconds and then transfer it to the telephone’s handset.

If you are close to the base, you may press its Multifunction button and transfer the call to the handset immediately.

4. Audio and visual indicators

The GN 6210’s headset and base have audio and visual indicators, which represent various actions and aspects associated with setting up and operating the product. Familiarise yourself with these indicators to fully benefit from your GN 6210.

The headset’s audio indicators:

Headset action

Volume Limit

Low Battery Tone Out of Range Incoming Call from Mobile Incoming Call from desk phone Pairing Confirmation

with base

with mobile

Establish Audio Link

Initiate Voice Dial

Voice Tag not Recognised

End Call/Audio Link Closed

Power ON/OFF

Audio indication

Repeated single high tone when min. or max. limits achieved (when button is pressed)

Two rapid high tones repeated every 20 seconds

No audio indications; gradual deterioration of audio quality Ring tone A

Ring tone B (only when using hook switch)

2 single tones

1 single tone

Series of tones, low to high

Double tone

Dual high-low tone

Series of tones, high to low

Low to high/high to low tone

7

Image 7
Contents Manual del usuario User guideBedienungsanleitung Guide de l’utilisateurProduct information English - GN 6210 user guideWhat you hear 1. Turning headset on and off2. Use with desktop telephone What you doMaking calls Verify pairing2.3 Headset -- handset switching while on a call 2.4 Operating GN 6210 with GN 1000 RHL accessoryEnding calls 3. Use with Mobile phonesHeadset -- handset switching while on a call Answering calls3.2 Making voice-activatedcalls Using a desk phone 4. Audio and visual indicatorsLow Battery indications in the headset When using a mobileThe headset’s visual indicators 5. TroubleshootingThe base’s visual indicators To reset the headset using your base unit 6. Cleaning, safety and maintenanceResetting the base Resetting the headsetDispose of the product and battery according to local standards and regulations. The battery is guaranteed for 2 years Produktinformationen Deutsch - GN 6210 BedienungsanleitungWas Sie hören 1. Headset ein- und ausschalten2. Verwendung mit einem Desktop-Telefon Was Sie tunGeräteabgleich überprüfen 3 Verwendung mit Mobiltelefonen Sprachgesteuerten Anruf tätigen 3.2 Sprachgesteuerte AnrufeBei Verwendung eines Mobiltelefons 4. Akustische und optische SignaleAkustische Signale des Headsets Anzeige Niedriger Akkuladestand im HeadsetOptische Signale des Headsets 5. FehlersucheOptische Signale der Basisstation Reset der Basisstation Reset aller Geräteabgleiche des Headsets 6. Reinigung, Sicherheit und WartungPrésentation du produit Français - GN 6210 - Guide de l’utilisateur2. Utilisation avec un téléphone fixe Signal sonoreSignal visuel 1. Mise en marche et arrêt du micro-casqueContrôle du couplage 3. Utilisation avec un téléphone mobile Modèles Sony Ericsson Lors de l’utilisation d’un téléphone fixe 3.2 Passer un appel par reconnaissance vocaleComment passer un appel par reconnaissance vocale Lors de l’utilisation d’un mobileVoyants de la base 4. Indicateurs sonores et voyantsIndicateurs sonores du micro-casque Voyants du micro-casque5. Dépannage 6. Nettoyage, sécurité et entretien Información del producto Español - Manual del usuario del GNQué va a oir 1. Encendido y apagado del microcasco2. Uso con teléfonos fijos Qué tiene que hacerComprobación del emparejamiento 3. Uso con teléfonos móviles Para realizar una llamada activada por voz 3.2 Realización de llamadas activadas por vozUso de un teléfono de sobremesa 4. Indicadores de audio y visualesIndicaciones de batería baja en el microcasco Cuando utilice un móvilIndicador en línea de la base Indicadores visuales del microcascoIndicadores visuales de la base Modo del microcasco5. Solución de problemas 6 Limpieza, seguridad y mantenimiento