Sony FR 20 manual Troubleshooting, The headset’s visual indicators, The base’s visual indicators

The headset’s visual indicators

Headset mode	Headset indicator
Power Off	OFF (no charger)
Charging in Process	ON (charger plugged in, or headset placed in base)
Charging Complete	OFF (charger plugged in, or headset placed in base)
Pairing Mode	ON (no charger)
Pairing Successful	Series of 10 rapid flashes
Audio Link (on a call)	Frequent flashes
Headset ON	Continuous single flash (slow)
Headset ON and in range of the base	Continuous double flashes (slow)
Headset turn on/off	5 flashes (fast)
Test link established	Frequent flashes

The base’s visual indicators:

Base’s on-line indicator	On-line indicator
On-line with a call	Flashes
Base’s pairing indicator	Pairing indicator
Pairing Mode	ON (solid blue light)
Pairing Successful	Series of 10 rapid flashes
Base reset Successful	Lights for two seconds
Base’s battery indicator	Battery indicator
Battery indication	Number of lit indicators indicates level of charge
	1 lit indicator = 25% charged
	2 lit indicators = 50% charged
	3 lit indicators = 75% charged
	4 lit indicators = 100% charged
ALL base’s indicators	All indicators
Power is turned ON	Light up for 3 seconds.

5. Troubleshooting

I’ve set up my GN 6210, but I still don’t hear a dial tone?

There are several possible reasons why you do not hear a dial tone. Check that:

•The various cords are correctly set up and inserted. See section 2 in the quick set-up guide for setting up and connecting cords instructions.

•The clear dial tone adjustment (using the Clear Dial Tone Adjustment Switch at the bottom of the base) is correct. See Section 4.5 in the quick set-up guide for information on clear dial tone adjustment.

•The power supply is correctly hooked to the base.

•You have not unplugged your desk telephone’s telephone line.

Why don’t I get sound in my headset when using my mobile phone?

1.Verify that you’re your headset is switched on.

2.Verify that you have paired the headset with your mobile phone

3.Consult section 3.2 in the quick set-up guide for operating details

8