Use with Mobile phones, Answering calls, Ending calls

Answering calls:

1. A beep in your headset and the phone’s usual ringing tone will indi- cate an incoming call.

2. Press shortly on either the headset or the base’s Multifunction button .

3. The GN 1000 RHL will lift the telephone’s handset and you are now connected to your caller.

The Headset Indicator and the On-line Indicator will ﬂash frequently for the duration of the call.

Ending calls:

1.Press shortly on either the headset or the base’s Multifunction button . The GN 1000 RHL will lower the telephone’s handset and your call is now terminated.

Headset <––> handset switching (while on a call)

To switch from using the headset to using the handset during a call:

1.Pick up the telephone’s handset from the GN 1000 RHL’s lifter arm.

2.Press shortly on the headset or the base’s Multifunction button and the call is transferred and can be continued via the handset.

3.To end the call, hang up the telephone handset.

To switch from using the handset to using the headset during a call:

1.Press shortly on either the headset or the base’s Multifunction button . The connection will be established shortly.

2.When the GN 1000 RHL is activated, place the handset on the lifter arm.

3.To end the call, press shortly on either the headset or the base’s Multifunction button.

You may continue wearing the headset, or place it in the base for recharging.

3. Use with Mobile phones

3.1 Setting up and using the GN 6210 with your mobile phone

Your GN 6210 is compatible for use with most Bluetooth® mobile phones. Before setting up (pairing) your GN 6120 to your speciﬁc mobile phone, you will need to:

•Determine if you should set up according to the headset or the hands-free proﬁle.

•Prepare your mobile phone for Bluetooth device discovery.

Setting up according to headset or hands-free proﬁle

Mobile phones work with your GN 6210 using either their headset or hands-free proﬁles. Before setting up or using your mobile phone with your GN 6210, you must determine which one of your mobile phone’s proﬁles works best with your headset.

Instructions for setting up your headset with the two proﬁles vary slightly. These instructions can be found from Section 5 of the GN 6210 Quick Set Up guide.

The following mobile phones models use the headset proﬁle to work with the GN 6210:

•Sony Ericsson models

•Nokia 6310, 6310i, 7600 and 5650

•Siemens S55

The following mobile phones models use the hands-free proﬁle to work with the GN 6210:

• Newer Nokia models