■Setup Menu Description
●Presetting
(1)Position (POSITION SET)
Aligns the camera position and focal point by panning, tilting, zooming and focusing. See page 17 for the setting.
(2)Preset Identification (PRESET ID)
Assigns the name for preset IDs (identification of up to 16 alphanumeric characters) and can be switched on or off on the monitor screen.
See page 19 for the setting.
(3) Light Control (ALC/MANUAL)
Selects the ALC or MANUAL mode for adjusting the lens iris.
See page 20 for the setting.
(4) Dwell Time (DWELL TIME)
Displays the picture at each camera position for the selected duration.
You can select a preset duration from the menu.
See page 21 for the setting.
(5)Scene File (SCENE FILE) Stores up to 10 files.
Each file has a set of detailed parameters for the shutter speed, AGC, electronic sensitivity enhance- ment, white balance, motion detector and AF mode. The scene files can be recalled later to repro- duce the parameter settings under the same conditions as stored in the files.
See page 21 for the setting.
●Home Position (HOME POSITION)
The home position is the camera’s basic position.
The camera returns to this position automatically after a specific time.
Following a manual operation. This setting functions only when AUTO MODE is OFF. See page 22 for the setting.
●Self Return (SELF RETURN)
In ON position, the camera returns to AUTO MODE after a specific time following a manual operation. See page 22 for the setting.
●Auto Mode (AUTO MODE)
The auto mode is used for setting the movement of the camera.
You can select one of four automatic operation modes and one manual operation mode as follows: OFF: No automatic operation. The camera can be operated only manually.
SEQ: The camera operates in the sequence of preset positions in numerical order.
SORT: The camera operates in the sequence of preset positions counterclockwise from Pan Starting Point.
AUTO PAN: The camera automatically turns within the preset panning range.
PATROL: The camera operates in the
11