Panasonic WV-CW864 To Display the Camera Setting Menu, Camera Identification Camera ID

Page 35

ON: The last displayed still image is shown till the camera finishes moving to a preset position. However, the still image may be distorted with the effect of panning or tilting.

OFF: The current image is being displayed while the camera is moving to a preset position.

■Camera Setting

To Display the Camera Setting Menu

•Move the cursor to CAMERA O, and press the CAM (SET) key. The camera setting menu appears.

●Camera Identification (CAMERA ID)

1.Move the cursor to CAMERA ID, and select ON to display the camera identification by using the joystick.

The factory default setting is OFF.

2.Follow the steps below to edit the camera ID characters:

2-1 Move the cursor to CAMERA ID and press the CAM (SET) key to display the character editing menu.

2-2 Move the cursor to the character you want to edit or change by using the joystick, and press the CAM (SET) key. The selected character appears in the editing area.

2-3 Repeat the steps above until all characters are edited.

3.After editing the camera identification characters, follow the steps below to decide the position of the CAMERA ID.

3-1 Move the cursor to POSI, and press the CAM (SET) key to display the ID position menu.

3-2 Decide the position of the camera ID by using the joystick. Press the MON (ESC) key to fix the position, and return to the character editing menu.

Notes:

•When you want the pointer to move to a specific character in the editing area, select a new character, and press the CAM (SET) key. This function allows you to edit or correct a specif- ic character.

•To enter a blank space into the camera ID, move the cursor to SPACE, and press the CAM (SET) key.

•To erase all characters in the editing area, move the cursor to RESET, and press the CAM (SET) key.

Setup menu

** SET UP MENU **

PRESET 1 MAP

HOME POSITION OFF

SELF RETURN OFF

AUTO MODE OFF AUTO PAN KEY AUTO PAN DIGITAL FLIP ON LOCAL/REMOTE LOCAL SPECIAL1

CAMERA

RS485 SET UP

Camera setting menu

** SET UP **

CAMERA ID

OFF

ALC/MANUAL

ALC

SHUTTER

 

OFF

AGC

 

ON(MID)

SENS UP

 

X2 AUTO

SYNC

 

INT

WHITE BAL

ATW1

MOTION DET

OFF

AF MODE

 

MANUAL S

RET

SPECIAL2

** SET UP **

CAMERA ID

ON

 

ALC/MANUAL

ALC

 

SHUTTER

 

OFF

AGC

 

ON(MID)

SENS UP

 

X2 AUTO

SYNC

 

INT

WHITE BAL

ATW1

MOTION DET

OFF

AF MODE

 

MANUAL S

RET

SPECIAL2

Character editing menu

CAMERA ID 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ().,'":;&#!?= +-*/%$

SPACE

POSI RET RESET CAM1............

CAM1

36

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Operating Instructions Contents English Important Safety InstructionsPreface FeaturesDo not attempt to disassemble the cam- era PrecautionsCamera Cleaning Preset Data Uploading or DownloadingConsumables Do not install the camera in places sub- ject to vibrationsNever aim the camera at the sun If Over Heat appears on the monitor screenConstruction Setup Menu SetupClose CAM Setup F4 key Key for 2 sec Key for 2 seco Focus Switch Zoom SwitchUp Switch Right Switch Left Switch SET Key CAM SET Key Down SwitchHome Position Home Position Setup Menu DescriptionPresetting Auto Mode Auto ModeSpecial 1 Menu Auto Pan Key Auto PAN KEYDigital Flip Digital Flip Local/Remote LOCAL/REMOTECamera Synchronization Sync Shutter Speed ShutterGain Control AGC Electronic Sensitivity Enhancement Sens UPRS485 communication Submenu Display Setting ProceduresSetup Menu Display Menu DisplayTo Set Panning/Tilting Positions PresettingPreset Menu Display Position Setting Position SETTo Set the Lens Zoom and Focus Positions ZOOM/FOCUS setting menuPan Offset To Change an Entered Preset ID Preset Identification Setting Preset IDTo Enter a New Preset ID To Copy a Preset ID from Another PositionManual setting menu Light Control Setting ALC/MANUALTo Set a Display Position for a Preset ID To Return to the Preset Setting MenuTo Return to the Setup Menu Scene File Setting Scene FilePreset Speed Setting Preset Speed To Return to the Preset Number Set MenuSelf Return Setting Self Return Deleting Preset PositionsHome Position Setting Auto PAN setting menu Auto Mode Selection Auto ModeWhen the panning, tilting, zooming or focusing in the SEQ Digital Flip Setting Digital Flip Auto Pan Key SettingPrivacy Zone Privacy Zone Local/Remote Setting LOCAL/REMOTESpecial 1 Menu Setting Special Zone Scale setting menu Area Title Area Title When on Nesw is selectedArea Title Nesw setting menu Proportional Pan/Tilt PROPO. P/TArea Title Editing Setting on UserDisplay Position setting menu Direction User setting menuArea Title menu Patrol-learn and Patrol Play PatrolTo Quit Editing Patrol Play with a Controller not Having the Patrol Key Patrol-learn with a Controller Having the Patrol KeyPatrol-learn with a Controller not Having the Patrol Key Patrol Play with a Controller Having the Patrol KeyCNT-CLS 1, 2 Output Alarm Input/Output Alarm IN/OUTAlarm I/O submenu Password Verification Password Lock Password LockNew Password Cleaning CleaningImage Hold Image Hold Preset Alarm Preset ALMElectronic Zoom EL-ZOOM Camera Identification Camera ID Camera SettingTo Display the Camera Setting Menu Camera setting menuBacklight compensation menu Turns to white Blinking Electronic Sensitivity Enhancement Sens UP Shutter Speed Setting ShutterGain Control AGC Sync menu Line-lock Sync Mode LLSynchronization Sync White Balance White BAL Auto-Tracing White Balance Mode ATW1/ATW2ATW fine adjustment menu AWC fine adjustment menu Automatic White Balance Control Mode AWCMotion detect menu Motion Detector Motion DETAuto Focus Setting AF Mode Special 2 Menu SPECIAL2 Camera Resetting Camera Reset Black Burst Setting Burst BWTo Restore the Camera Default Position Refresh Changing the Camera Communication Parameters RS485 SetupInitial Camera Communication Parameters Sub Address SUB Address Alarm Data Alarm DataDelay Time Delay Time Unit Number Unit NumberCeiling mount InstallationPrecautions Mounting the CameraWaterproof Material X4 Screws Upper Base PreparationsDisassembling the Camera Mounting the BracketRS485 Parameter Setup Setting the SwitchesUnit Number For Panasonic’s ProtocolSwitch position Unit Mounting the camera RS485 SettingConnections AC Power Supply ConnectionHow to Assemble the Cable with the Accessory Connector RS485 Connection Alarm in ConnectionsAlarm OUT Connections System Connections Prevention of Blooming and Smear SpecificationsSignal-to-noise ratio Power consumptionWV-7176E AccessoriesOptional Accessories Shortcuts AppendixRegional Offices N0202-1032 V8QA5996BN Imprimé au Japon
Top Page Image Contents