Panasonic WV-CW864 operating instructions Mounting the camera, RS485 Setting

RS485 Setting							SW2
The 4-bit DIP switch is used for
					ON
RS485 termination.
						1	2	3	4
						4-bit DIP SW
		BP 1			Function
Switch		ON		Termination ON
position		OFF		Termination OFF *
	BP 2	BP 3	BP 4		Function
Switch	ON	ON	ON	Half duplex (2 line)
position	OFF	OFF	OFF	Full duplex (4 line) *

Notes:

•Defaults are marked with *.

•BP stands for Bit Position.

•Full duplex is not available in a daisy chain connection. (Panasonic system controllers only)

5.Mounting the camera

(1)Aim the “START” arrow at the bent por- tion of the leaf spring.

Bending Leaf Spring

(2)Be sure to hook the fall prevention wire into the bracket.

Fall Prevention

Wire

(3)Fix the camera to the upper base.

•Move the camera up so that its guide pins fit into the guide holes of the upper base.

•Turn the camera counter-clockwise to the end, viewed from the bottom.

•Fasten 3 screws.

X3 Screws

Upper Base

Enclosure

54