Panasonic WV-CW864 Light Control Setting ALC/MANUAL, Backlight compensation menu

Page 36

•The CAMERA ID moves faster when the joystick is kept at the right or left for one second or more.

•Move the cursor to RET to return to the SET UP menu, and press the CAM (SET) key.

CAMERA ID 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ().,'":;&#!?= +-*/%$

SPACE

POSI RET RESET

CAM1............

CAMERA ID 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ().,'":;&#!?= +-*/%$

SPACE

POSI RET RESET

CAM1............

●Light Control Setting (ALC/MANUAL)

1.Display SET UP MENU on the monitor screen by referring to page 16.

2.Move the cursor to ALC/MANUAL and select ALC or MANUAL by using the joystick.

The factory default setting is ALC.

When you select ALC, set backlight compensation.

Note: The backlight compensation submenu associated with this menu is described separately and should be set up after installing the camera at the site and observing the actual site picture.

3.When MANUAL is selected, quit the setup menu by pressing the MON (ESC) key. Press the OPEN or CLOSE key on the controller for iris adjustment.

Camera setting menu

** SET UP **

CAMERA ID		OFF
ALC/MANUAL		ALC
SHUTTER		OFF
AGC		ON(MID)
SENS UP		X2 AUTO
SYNC		INT
WHITE BAL		ATW1
MOTION DET		OFF
AF MODE		MANUAL S
RET	SPECIAL2

(1) ALC Mode with BLC ON

1.Press the CAM (SET) key after selecting ALC. The ALC CONT menu appears.

2.Move the cursor to the BLC and select ON.

3.If you want to adjust the video output level, move the “I” cursor for LEVEL. Adjust it to the desired level by using the joystick.

4.Move the cursor to RET and press the CAM (SET) key to return to the CAM SET UP menu. To return to the camera picture, press the F4 button.

Backlight compensation menu

** ALC CONT **

BACK LIGHT COMP

BLC	OFF
MASK SET
LEVEL	••••••••
	-			+
RET
ALC CONT
BACK LIGHT COMP
BLC
BLC	ON
LEVEL	••••••••
	-			+

RET

37

Image 36

Contents Operating Instructions Contents Important Safety Instructions EnglishFeatures PrefacePrecautions Camera CleaningPreset Data Uploading or Downloading Do not attempt to disassemble the cam- eraDo not install the camera in places sub- ject to vibrations Never aim the camera at the sunIf Over Heat appears on the monitor screen ConsumablesConstruction Setup Setup MenuFocus Switch Zoom Switch Up Switch Right Switch Left SwitchSET Key CAM SET Key Down Switch Close CAM Setup F4 key Key for 2 sec Key for 2 secoSetup Menu Description PresettingAuto Mode Auto Mode Home Position Home PositionAuto Pan Key Auto PAN KEY Digital Flip Digital FlipLocal/Remote LOCAL/REMOTE Special 1 MenuCamera Shutter Speed Shutter Gain Control AGCElectronic Sensitivity Enhancement Sens UP Synchronization SyncRS485 communication Setting Procedures Setup Menu DisplayMenu Display Submenu DisplayPresetting Preset Menu DisplayPosition Setting Position SET To Set Panning/Tilting PositionsZOOM/FOCUS setting menu Pan OffsetTo Set the Lens Zoom and Focus Positions Preset Identification Setting Preset ID To Enter a New Preset IDTo Copy a Preset ID from Another Position To Change an Entered Preset IDLight Control Setting ALC/MANUAL To Set a Display Position for a Preset IDTo Return to the Preset Setting Menu Manual setting menuScene File Setting Scene File Preset Speed Setting Preset SpeedTo Return to the Preset Number Set Menu To Return to the Setup MenuDeleting Preset Positions Home Position SettingSelf Return Setting Self Return Auto Mode Selection Auto Mode Auto PAN setting menuWhen the panning, tilting, zooming or focusing in the SEQ Auto Pan Key Setting Digital Flip Setting Digital FlipLocal/Remote Setting LOCAL/REMOTE Special 1 Menu Setting SpecialPrivacy Zone Privacy Zone Zone Scale setting menu When on Nesw is selected Area Title Nesw setting menuProportional Pan/Tilt PROPO. P/T Area Title Area TitleSetting on User Display Position setting menuDirection User setting menu Area Title EditingPatrol-learn and Patrol Play Patrol To Quit EditingArea Title menu Patrol-learn with a Controller Having the Patrol Key Patrol-learn with a Controller not Having the Patrol KeyPatrol Play with a Controller Having the Patrol Key Patrol Play with a Controller not Having the Patrol KeyAlarm Input/Output Alarm IN/OUT Alarm I/O submenuCNT-CLS 1, 2 Output Password Lock Password Lock Password VerificationCleaning Cleaning New PasswordPreset Alarm Preset ALM Electronic Zoom EL-ZOOMImage Hold Image Hold Camera Setting To Display the Camera Setting MenuCamera setting menu Camera Identification Camera IDBacklight compensation menu Turns to white Blinking Shutter Speed Setting Shutter Gain Control AGCElectronic Sensitivity Enhancement Sens UP Line-lock Sync Mode LL Synchronization SyncSync menu Auto-Tracing White Balance Mode ATW1/ATW2 ATW fine adjustment menuWhite Balance White BAL Automatic White Balance Control Mode AWC AWC fine adjustment menuMotion Detector Motion DET Motion detect menuAuto Focus Setting AF Mode Special 2 Menu SPECIAL2 Black Burst Setting Burst BW To Restore the Camera Default Position RefreshCamera Resetting Camera Reset RS485 Setup Initial Camera Communication ParametersChanging the Camera Communication Parameters Alarm Data Alarm Data Delay Time Delay TimeUnit Number Unit Number Sub Address SUB AddressInstallation PrecautionsMounting the Camera Ceiling mountPreparations Disassembling the CameraMounting the Bracket Waterproof Material X4 Screws Upper BaseSetting the Switches RS485 Parameter SetupFor Panasonic’s Protocol Unit NumberSwitch position Unit RS485 Setting Mounting the cameraAC Power Supply Connection How to Assemble the Cable with the Accessory ConnectorConnections Alarm in Connections Alarm OUT ConnectionsRS485 Connection System Connections Specifications Signal-to-noise ratioPower consumption Prevention of Blooming and SmearAccessories Optional AccessoriesWV-7176E Appendix ShortcutsN0202-1032 V8QA5996BN Imprimé au Japon Regional Offices