Panasonic WV-CW864 operating instructions Synchronization Sync, Line-lock Sync Mode LL, Sync menu

Page 39

●Synchronization (SYNC)

1.Display SET UP MENU on the monitor screen by referring to page 16.

2.Move the cursor to SYNC and select LL or INT by using the joy- stick.

The factory default setting is INT.

Important Notices:

1.The priority of SYNC modes is as follows:

1.Multiplexed vertical drive (VD2) (highest priority)

2.Line-lock (LL)

3.Internal sync (INT) (lowest priority)

2.To use internal sync, select INT.

3.Whenever the vertical drive pulse (VD2) is supplied to the cam- era, the camera sync mode is automatically switched to the multi- plexed vertical drive pulse (VD2) regardless of the selected sync mode.

Line-lock Sync Mode (LL)

1.Display SET UP MENU on the monitor screen by referring to page 16.

2.Move the cursor to SYNC and select LL by using the joystick. LL sync mode is not available when the multiplexed vertical drive (VD2) pulse is supplied.

3.After selecting LL, press the CAM (SET) key. The SYNC menu appears on the monitor screen.

4.Supply the video output signal of the camera to be adjusted and the reference video output signal (for example, Camera 1) to a dual-trace oscilloscope.

5.Set the dual-trace oscilloscope to the vertical rate and expand the vertical sync portion on the oscilloscope.

6.Move the cursor to COARSE by using the joystick.

7.Match the vertical phases for both video output signals as closely as possible by using the joystick. The coarse adjustment can be incremented in steps of 22.5 degrees (16 steps) with the joystick.

1 (1 - - - 16): 0 degrees

2 (1 - - - 16): 22.5 degrees

16 (1 - - - 16): 337.5 degrees

Note: After the 16th step, the adjustment returns to the first step.

Camera setting menu

** SET UP **

CAMERA ID		OFF
ALC/MANUAL		ALC
SHUTTER		OFF
AGC		ON(MID)
SENS UP		X2 AUTO
SYNC		INT
WHITE BAL		ATW1
MOTION DET		OFF
AF MODE		MANUAL S
RET	SPECIAL2

Camera setting menu

** SET UP **

CAMERA ID		OFF
ALC/MANUAL		ALC
SHUTTER		OFF
AGC		ON(MID)
SENS UP		X2 AUTO
SYNC		LL
WHITE BAL		ATW1
MOTION DET		OFF
AF MODE		MANUAL S
RET	SPECIAL2

SYNC menu

** SYNC **

V PHASE

COARSE 1(1--16)

FINE••••••••

- +

RET

** SYNC **

V PHASE

COARSE 1(1--16)

FINE••••••••

- +

RET

40

Image 39

Contents Operating Instructions Contents English Important Safety InstructionsPreface FeaturesDo not attempt to disassemble the cam- era PrecautionsCamera Cleaning Preset Data Uploading or DownloadingConsumables Do not install the camera in places sub- ject to vibrationsNever aim the camera at the sun If Over Heat appears on the monitor screenConstruction Setup Menu SetupClose CAM Setup F4 key Key for 2 sec Key for 2 seco Focus Switch Zoom SwitchUp Switch Right Switch Left Switch SET Key CAM SET Key Down SwitchHome Position Home Position Setup Menu DescriptionPresetting Auto Mode Auto ModeSpecial 1 Menu Auto Pan Key Auto PAN KEYDigital Flip Digital Flip Local/Remote LOCAL/REMOTECamera Synchronization Sync Shutter Speed ShutterGain Control AGC Electronic Sensitivity Enhancement Sens UPRS485 communication Submenu Display Setting ProceduresSetup Menu Display Menu DisplayTo Set Panning/Tilting Positions PresettingPreset Menu Display Position Setting Position SETZOOM/FOCUS setting menu Pan OffsetTo Set the Lens Zoom and Focus Positions To Change an Entered Preset ID Preset Identification Setting Preset IDTo Enter a New Preset ID To Copy a Preset ID from Another PositionManual setting menu Light Control Setting ALC/MANUALTo Set a Display Position for a Preset ID To Return to the Preset Setting MenuTo Return to the Setup Menu Scene File Setting Scene FilePreset Speed Setting Preset Speed To Return to the Preset Number Set MenuDeleting Preset Positions Home Position SettingSelf Return Setting Self Return Auto PAN setting menu Auto Mode Selection Auto ModeWhen the panning, tilting, zooming or focusing in the SEQ Digital Flip Setting Digital Flip Auto Pan Key SettingLocal/Remote Setting LOCAL/REMOTE Special 1 Menu Setting SpecialPrivacy Zone Privacy Zone Zone Scale setting menu Area Title Area Title When on Nesw is selectedArea Title Nesw setting menu Proportional Pan/Tilt PROPO. P/TArea Title Editing Setting on UserDisplay Position setting menu Direction User setting menuPatrol-learn and Patrol Play Patrol To Quit EditingArea Title menu Patrol Play with a Controller not Having the Patrol Key Patrol-learn with a Controller Having the Patrol KeyPatrol-learn with a Controller not Having the Patrol Key Patrol Play with a Controller Having the Patrol KeyAlarm Input/Output Alarm IN/OUT Alarm I/O submenuCNT-CLS 1, 2 Output Password Verification Password Lock Password LockNew Password Cleaning CleaningPreset Alarm Preset ALM Electronic Zoom EL-ZOOMImage Hold Image Hold Camera Identification Camera ID Camera SettingTo Display the Camera Setting Menu Camera setting menuBacklight compensation menu Turns to white Blinking Shutter Speed Setting Shutter Gain Control AGCElectronic Sensitivity Enhancement Sens UP Line-lock Sync Mode LL Synchronization SyncSync menu Auto-Tracing White Balance Mode ATW1/ATW2 ATW fine adjustment menuWhite Balance White BAL AWC fine adjustment menu Automatic White Balance Control Mode AWCMotion detect menu Motion Detector Motion DETAuto Focus Setting AF Mode Special 2 Menu SPECIAL2 Black Burst Setting Burst BW To Restore the Camera Default Position RefreshCamera Resetting Camera Reset RS485 Setup Initial Camera Communication ParametersChanging the Camera Communication Parameters Sub Address SUB Address Alarm Data Alarm DataDelay Time Delay Time Unit Number Unit NumberCeiling mount InstallationPrecautions Mounting the CameraWaterproof Material X4 Screws Upper Base PreparationsDisassembling the Camera Mounting the BracketRS485 Parameter Setup Setting the SwitchesUnit Number For Panasonic’s ProtocolSwitch position Unit Mounting the camera RS485 SettingAC Power Supply Connection How to Assemble the Cable with the Accessory ConnectorConnections Alarm in Connections Alarm OUT ConnectionsRS485 Connection System Connections Prevention of Blooming and Smear SpecificationsSignal-to-noise ratio Power consumptionAccessories Optional AccessoriesWV-7176E Shortcuts AppendixRegional Offices N0202-1032 V8QA5996BN Imprimé au Japon