Panasonic WV-CW864 Light Control Setting ALC/MANUAL, To Set a Display Position for a Preset ID

Page 19

To Set a Display Position for a Preset ID

(1)Move the cursor to POSI and press the CAM (SET) key. The display position set menu appears.

(2)Move the ID to the desired position by using the joystick, and press the MON (ESC) key. The display position is set and the monitor screen returns to the preset ID setting menu.

To Enter the Next ID without Returning to the Preset Setting Menu

(1)In the preset ID setting menu, move the cursor to the top line and select a desired position number by moving the joystick to the right or left.

(2)Enter, copy, change or delete the ID as described above.

To Return to the Preset Setting Menu

Move the cursor to RET and press the CAM (SET) key.

●Light Control Setting (ALC/MANUAL)

1.Move the cursor to ALC/MANUAL and select ALC or MANUAL by moving the joystick to the right or left.

The factory default setting is ALC.

ALC: The lens iris is automatically adjusted to suit the brightness of the object.

MANUAL: The lens iris is fixed at the set value regardless of the brightness of the object.

2.In case of ALC O

Press the CAM (SET) key. The backlight compensation menu appears on the monitor screen. See page 37 for the setting.

3.In case of MANUAL O

Press the CAM (SET) key. The setting menu appears on the moni- tor screen. Set the lens iris level as desired by moving the joystick to the right or left.

PRESET NO. 1* 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ().,'":;&#!?= +-*/%$

SPACE

COPY POSI RET RESET

DOOR............

Display position set menu

FLOOR 1

DOOR

PRESET NO. 1* 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ().,'":;&#!?= +-*/%$

SPACE

COPY POSI RET RESET

DOOR............

Preset setting menu

PRESET NO. 1*
POSITION SET
PRESET ID	ON
ALC/MANUAL	ALC
DWELL TIME	10S
SCENE FILE	OFF
PRESET SPEED	••••••••
	L	H

RET DEL

Manual setting menu

** MANUAL CONT **

IRIS ••••••••

CLOSE OPEN

RET

20

Image 19

Contents Operating Instructions Contents English Important Safety InstructionsPreface FeaturesDo not attempt to disassemble the cam- era PrecautionsCamera Cleaning Preset Data Uploading or DownloadingConsumables Do not install the camera in places sub- ject to vibrationsNever aim the camera at the sun If Over Heat appears on the monitor screenConstruction Setup Menu SetupClose CAM Setup F4 key Key for 2 sec Key for 2 seco Focus Switch Zoom SwitchUp Switch Right Switch Left Switch SET Key CAM SET Key Down SwitchHome Position Home Position Setup Menu DescriptionPresetting Auto Mode Auto ModeSpecial 1 Menu Auto Pan Key Auto PAN KEYDigital Flip Digital Flip Local/Remote LOCAL/REMOTECamera Synchronization Sync Shutter Speed ShutterGain Control AGC Electronic Sensitivity Enhancement Sens UPRS485 communication Submenu Display Setting ProceduresSetup Menu Display Menu DisplayTo Set Panning/Tilting Positions PresettingPreset Menu Display Position Setting Position SETPan Offset ZOOM/FOCUS setting menuTo Set the Lens Zoom and Focus Positions To Change an Entered Preset ID Preset Identification Setting Preset IDTo Enter a New Preset ID To Copy a Preset ID from Another PositionManual setting menu Light Control Setting ALC/MANUALTo Set a Display Position for a Preset ID To Return to the Preset Setting MenuTo Return to the Setup Menu Scene File Setting Scene FilePreset Speed Setting Preset Speed To Return to the Preset Number Set MenuHome Position Setting Deleting Preset PositionsSelf Return Setting Self Return Auto PAN setting menu Auto Mode Selection Auto ModeWhen the panning, tilting, zooming or focusing in the SEQ Digital Flip Setting Digital Flip Auto Pan Key SettingSpecial 1 Menu Setting Special Local/Remote Setting LOCAL/REMOTEPrivacy Zone Privacy Zone Zone Scale setting menu Area Title Area Title When on Nesw is selectedArea Title Nesw setting menu Proportional Pan/Tilt PROPO. P/TArea Title Editing Setting on UserDisplay Position setting menu Direction User setting menuTo Quit Editing Patrol-learn and Patrol Play PatrolArea Title menu Patrol Play with a Controller not Having the Patrol Key Patrol-learn with a Controller Having the Patrol KeyPatrol-learn with a Controller not Having the Patrol Key Patrol Play with a Controller Having the Patrol KeyAlarm I/O submenu Alarm Input/Output Alarm IN/OUTCNT-CLS 1, 2 Output Password Verification Password Lock Password LockNew Password Cleaning CleaningElectronic Zoom EL-ZOOM Preset Alarm Preset ALMImage Hold Image Hold Camera Identification Camera ID Camera SettingTo Display the Camera Setting Menu Camera setting menuBacklight compensation menu Turns to white Blinking Gain Control AGC Shutter Speed Setting ShutterElectronic Sensitivity Enhancement Sens UP Synchronization Sync Line-lock Sync Mode LLSync menu ATW fine adjustment menu Auto-Tracing White Balance Mode ATW1/ATW2White Balance White BAL AWC fine adjustment menu Automatic White Balance Control Mode AWCMotion detect menu Motion Detector Motion DETAuto Focus Setting AF Mode Special 2 Menu SPECIAL2 To Restore the Camera Default Position Refresh Black Burst Setting Burst BWCamera Resetting Camera Reset Initial Camera Communication Parameters RS485 SetupChanging the Camera Communication Parameters Sub Address SUB Address Alarm Data Alarm DataDelay Time Delay Time Unit Number Unit NumberCeiling mount InstallationPrecautions Mounting the CameraWaterproof Material X4 Screws Upper Base PreparationsDisassembling the Camera Mounting the BracketRS485 Parameter Setup Setting the SwitchesUnit Number For Panasonic’s ProtocolSwitch position Unit Mounting the camera RS485 SettingHow to Assemble the Cable with the Accessory Connector AC Power Supply ConnectionConnections Alarm OUT Connections Alarm in ConnectionsRS485 Connection System Connections Prevention of Blooming and Smear SpecificationsSignal-to-noise ratio Power consumptionOptional Accessories AccessoriesWV-7176E Shortcuts AppendixRegional Offices N0202-1032 V8QA5996BN Imprimé au Japon