Panasonic WV-CW864 White Balance White BAL, Auto-Tracing White Balance Mode ATW1/ATW2

8.Move the cursor to FINE by using the joystick.

9.Match the vertical phase for both video output signals as closely as possible by using the joystick.

Notes:

•When the “” cursor reaches the “+” end, it jumps back to “–”. At the same time, COARSE is incremented by one step to enable a continuous adjustment. The reverse takes place when the “” cursor reaches the “–” end.

•When the joystick is kept at the right or left for one second or more, the “” cursor moves quickly.

•To reset COARSE and FINE to the preset values, press the F2 button of the WV-CU550B. For the WV-RM70, press the Right and Left switches simultaneously. COARSE is preset to zero- crossing of the AC line phase.

•If the AC line phase contains spike noise, etc., the vertical phase of the video output signal may be disturbed.

●White Balance (WHITE BAL)

(1) Auto-Tracing White Balance Mode (ATW1/ATW2)

1.Display SET UP MENU on the monitor screen by referring to page 16.

2.Move the cursor to WHITE BAL and select ATW1 by using the joy- stick.

The factory default setting is ATW1.

The white balance of the camera is automatically adjusted.

3.For fine adjustment of ATW1/ATW2, press the CAM (SET) key. The ATW1/ATW2 fine adjustment menu appears on the monitor screen.

4.Move the cursor to R.

Obtain the optimum red gain by moving the joystick to the right or left.

5.Move the cursor to B.

Obtain the optimum blue gain by moving the joystick to the right or left.

6.Move the cursor to RET by using the joystick and press the CAM (SET) key to return to the SET UP menu.

** SYNC **
V PHASE
COARSE	4(1--16)
FINE	••••••••
	-	+
RET
** SYNC **
V PHASE
COARSE	1(1--16)
FINE	••••••••
	-	+

RET

Camera setting menu

** SET UP **

CAMERA ID		OFF
ALC/MANUAL		ALC
SHUTTER		OFF
AGC		ON(MID)
SENS UP		X2 AUTO
SYNC		INT
WHITE BAL		ATW1
MOTION DET		OFF
AF MODE		MANUAL S
RET	SPECIAL2

ATW fine adjustment menu

** ATW1 **

R••••••••

- +

B••••••••

- +

RET

41