Panasonic WV-CW864 operating instructions Password Lock Password Lock, Password Verification

Page 32

COAXIAL ALARM OUT

Alarm output signals are supplied through the coaxial cable.

1.Move the cursor to COAX ALM OUT and select ON or OFF.

2.Press the CAM (SET) key.

The factory default setting is OFF.

ON: The camera sends an alarm output signal after it turns to a preset position.

OFF: The camera does not send the output signal.

Notes:

•The camera ignores alarm inputs during manual operation.

•Select OFF when the camera downloads or uploads the preset data.

●Password Lock (PASSWORD LOCK)

Caution: For security do not operate your VCR for recording while the password menus are displayed on the monitor screen.

A 3-digit number is used for a password to limit access to the privacy zone settings.

1.Move the cursor to PASSWORD LOCK, then select ON or OFF by moving the joystick to the right or left.

The factory default setting is OFF.

Note: ON or OFF can be selected only after going through the password verification.

OFF: Access to the privacy zone settings is free. ON(ENB) or OFF(ENB) for PRIVACY ZONE appears on the SPECIAL 1 menu.

ON: Access is limited in the verification menu. ON(DIS) or OFF(DIS) for PRIVACY ZONE appears on the SPECIAL 1 menu.

2.Press the CAM (SET) key.

Password Verification

3. The password verification menu appears.

3-1 Select a numeral for the first digit by moving the joystick to the right or left, and press the CAM (SET) key. Though the entered password is not displayed, the up-arrow moves one character to the right.

3-2 Repeat the above step for the 2nd and 3rd digits. Default: 123.

3-3 The cursor moves to OK after all the three digits have been entered. Unless you want to change the password, press the CAM (SET) key.

If the password entered is entered, the screen returns to SPE- CIAL 1. ON and OFF settings are the same as made on the SPECIAL 1 menu is as set in step 1.

If a wrong password is entered, the screen returns to the veri- fication menu. Repeat steps 3-1 to 3-3 to verify the password.

3-4 To cancel an incomplete password,. move the cursor to RESET, and press the CAM (SET) key. The screen returns to the verification menu.

Special 1 menu

** SPECIAL

1 **

PRIVACY ZONE

OFF(ENB)

PROPO.P/T

ON

AREA TITLE

ON(USER)

PATROL

STOP

ALARM IN/OUT

 

 

PASSWORD LOCK

ON

 

CLEANING

OFF

 

EL-ZOOM

ON

PRESET ALM

OFF

IMAGE HOLD

OFF

RET

 

 

PASSWORD

** PASSWORD? ** 0 1 2 3 4 5 6 7 8 9

. . .

↑

OK RESET

NEW PASSWORD

RET

33

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Operating Instructions Contents Important Safety Instructions EnglishFeatures PrefacePrecautions Camera CleaningPreset Data Uploading or Downloading Do not attempt to disassemble the cam- eraDo not install the camera in places sub- ject to vibrations Never aim the camera at the sunIf Over Heat appears on the monitor screen ConsumablesConstruction Setup Setup MenuFocus Switch Zoom Switch Up Switch Right Switch Left SwitchSET Key CAM SET Key Down Switch Close CAM Setup F4 key Key for 2 sec Key for 2 secoSetup Menu Description PresettingAuto Mode Auto Mode Home Position Home PositionAuto Pan Key Auto PAN KEY Digital Flip Digital FlipLocal/Remote LOCAL/REMOTE Special 1 MenuCamera Shutter Speed Shutter Gain Control AGCElectronic Sensitivity Enhancement Sens UP Synchronization SyncRS485 communication Setting Procedures Setup Menu DisplayMenu Display Submenu DisplayPresetting Preset Menu DisplayPosition Setting Position SET To Set Panning/Tilting PositionsTo Set the Lens Zoom and Focus Positions ZOOM/FOCUS setting menuPan Offset Preset Identification Setting Preset ID To Enter a New Preset IDTo Copy a Preset ID from Another Position To Change an Entered Preset IDLight Control Setting ALC/MANUAL To Set a Display Position for a Preset IDTo Return to the Preset Setting Menu Manual setting menuScene File Setting Scene File Preset Speed Setting Preset SpeedTo Return to the Preset Number Set Menu To Return to the Setup MenuSelf Return Setting Self Return Deleting Preset PositionsHome Position Setting Auto Mode Selection Auto Mode Auto PAN setting menuWhen the panning, tilting, zooming or focusing in the SEQ Auto Pan Key Setting Digital Flip Setting Digital FlipPrivacy Zone Privacy Zone Local/Remote Setting LOCAL/REMOTESpecial 1 Menu Setting Special Zone Scale setting menu When on Nesw is selected Area Title Nesw setting menuProportional Pan/Tilt PROPO. P/T Area Title Area TitleSetting on User Display Position setting menuDirection User setting menu Area Title EditingArea Title menu Patrol-learn and Patrol Play PatrolTo Quit Editing Patrol-learn with a Controller Having the Patrol Key Patrol-learn with a Controller not Having the Patrol KeyPatrol Play with a Controller Having the Patrol Key Patrol Play with a Controller not Having the Patrol KeyCNT-CLS 1, 2 Output Alarm Input/Output Alarm IN/OUTAlarm I/O submenu Password Lock Password Lock Password VerificationCleaning Cleaning New PasswordImage Hold Image Hold Preset Alarm Preset ALMElectronic Zoom EL-ZOOM Camera Setting To Display the Camera Setting MenuCamera setting menu Camera Identification Camera IDBacklight compensation menu Turns to white Blinking Electronic Sensitivity Enhancement Sens UP Shutter Speed Setting ShutterGain Control AGC Sync menu Line-lock Sync Mode LLSynchronization Sync White Balance White BAL Auto-Tracing White Balance Mode ATW1/ATW2ATW fine adjustment menu Automatic White Balance Control Mode AWC AWC fine adjustment menuMotion Detector Motion DET Motion detect menuAuto Focus Setting AF Mode Special 2 Menu SPECIAL2 Camera Resetting Camera Reset Black Burst Setting Burst BWTo Restore the Camera Default Position Refresh Changing the Camera Communication Parameters RS485 SetupInitial Camera Communication Parameters Alarm Data Alarm Data Delay Time Delay TimeUnit Number Unit Number Sub Address SUB AddressInstallation PrecautionsMounting the Camera Ceiling mountPreparations Disassembling the CameraMounting the Bracket Waterproof Material X4 Screws Upper BaseSetting the Switches RS485 Parameter SetupFor Panasonic’s Protocol Unit NumberSwitch position Unit RS485 Setting Mounting the cameraConnections AC Power Supply ConnectionHow to Assemble the Cable with the Accessory Connector RS485 Connection Alarm in ConnectionsAlarm OUT Connections System Connections Specifications Signal-to-noise ratioPower consumption Prevention of Blooming and SmearWV-7176E AccessoriesOptional Accessories Appendix ShortcutsN0202-1032 V8QA5996BN Imprimé au Japon Regional Offices
Top Page Image Contents