Panasonic WV-CW864 When the panning, tilting, zooming or focusing in the SEQ

5.To set pan limit ON/OFF

Move the cursor to PAN LIMIT and select ON or OFF by mov- ing the joystick to the right or left.

The factory default setting is OFF.

ON: Manual pan is limited from the starting point to the end- point specified by position setting. Set ENDLESS to OFF before PAN LIMIT is set to ON.

OFF: Manual pan is not limited.

Endpoint
Start-end	Camera
	Self-end
range of	range of
auto pan	pan limit
	Starting point

Note: When ON is selected for PAN LIMIT, manual pan moves the camera away from the other side (PAN LIMIT) of the start-end range.

6.To set ENDLESS to ON/OFF

Move the cursor to ENDLESS, and select ON or OFF by moving the joystick to the right or left.

The factory default setting is OFF.

ON: The camera pans from the starting point to the endpoint, and keeps rotating in the same direction to return to the starting point. Set PAN LIMIT to OFF before ENDLESS is set to ON.

OFF: The camera pans from the starting point to the endpoint, and rotates backward to the starting point.

This movement is repeated over and over.

7.To set a dwell time

Move the cursor to DWELL TIME and select a dwell time by mov- ing the joystick to the right or left.

The factory default setting is 1S. Dwell time changes as follows:

0S 1S 2S 3S

30S20S 10S 5S

** AUTO PAN **
POSITION	START
	END
SPEED	••••••••
	L	H
PAN LIMIT	OFF
ENDLESS	ON
DWELL TIME	1S

RET

** AUTO PAN **
POSITION	START
	END
SPEED	••••••••
	L	H
PAN LIMIT	OFF
ENDLESS	OFF
DWELL TIME	1S

Notes:

• When the panning, tilting, zooming or focusing in the SEQ,	RET
SORT or PATROL mode is controlled manually, the Auto
mode function should be cancelled.
To activate the auto mode, select the desired auto mode
again or set a time for SELF RETURN in the SET UP menu.

•When 0S is selected, the camera stops without dwelling and starts.

•Auto refreshing may be activated during the patrol play or the auto mode to calibrate the lens position.

24