Panasonic WV-CW864 operating instructions Auto Mode Selection Auto Mode, Auto PAN setting menu

■Auto Mode Selection (AUTO MODE)

1.To set auto mode

Move the cursor to AUTO MODE and select a mode by moving the joystick to the right or left.

The factory default setting is OFF. Modes change as follows:

OFF SEQ SORTAUTO PANPATROL

OFF: No automatic operation. The camera can be operated only manually.

SEQ: The camera operates in the sequence of preset positions in numerical order.

SORT: The camera operates in the sequence of preset positions counterclockwise from the Pan/Tilt starting point.

AUTO PAN: The camera automatically turns within the preset panning range.

PATROL: The camera operates in the patrol-learn function.

2.When the AUTO PAN mode is selected, set details as follows: Move the cursor to AUTO PAN O and press the CAM (SET) key to display the AUTO PAN setting menu.

3.To set a panning starting point and panning endpoint Follow the steps below.

(1)Move the cursor to POSITION and press the CAM (SET) key. The cursor moves to START.

(2)Move the joystick to the right or left to select a panning start- ing point and press the CAM (SET) key.

This determines the starting point and the cursor moves to END.

(3)Move the joystick to the right or left to select a panning end- point and press the CAM (SET) key.

This determines the endpoint and the cursor moves to POSI- TION.

4.To set a panning speed

Move the cursor to SPEED, and set a panning speed by moving the joystick to the right or left .

The panning speed increases when the joystick is moved to the right, and decreases when it is moved to the left.

Caution: If the panning range is changed after the camera has not panned for a long time or has been panning in the same panning range, the picture may not be clear or noise may appear. In this case, pan the camera fully several times.

If this does not eliminate the problem, refer servicing to qualified service personnel.

Setup menu

**	SET UP MENU **
PRESET 1
MAP		OFF
HOME POSITION
SELF RETURN		OFF
AUTO MODE		AUTO PAN
AUTO PAN KEY		AUTO PAN
DIGITAL FLIP		ON
LOCAL/REMOTE		LOCAL
SPECIAL1
CAMERA
RS485 SET UP

AUTO PAN setting menu

** AUTO PAN **
	START
POSITION
	END
SPEED	••••••••
	L			H
PAN LIMIT	OFF
ENDLESS	OFF
DWELL TIME	1S
RET
** AUTO PAN **
POSITION	START
	END
SPEED	••••••••
	L			H
PAN LIMIT	OFF
ENDLESS	OFF
DWELL TIME	1S
RET
** AUTO PAN **
	START
POSITION
SPEED	END		••••
	••••
	L			H
PAN LIMIT	OFF
ENDLESS	OFF
DWELL TIME	1S
RET
** AUTO PAN **
POSITION	START
SPEED	END
		••••••••
		L		H
PAN LIMIT	OFF
ENDLESS	OFF
DWELL TIME	1S

RET

23