Panasonic WV-CW864 operating instructions Camera

Page 12

(6) Password Lock (PASSWORD LOCK)

This setting controls access to the privacy zone to be free or limited. If PASSWORD LOCK is set to ON, ON(DIS) or OFF(DIS) for PRIVACY ZONE appears on the SPECIAL 1 menu.

(7) Cleaning (CLEANING)

This is used for refreshing the electro-mechanical contacts built into the camera. Use this function for maintenance when the camera has been directed at a specific spot or panned over a specific range for a long time.

(8) Electronic Zoom (EL-ZOOM)

Up to 10-fold electronic zooming is available besides 22-fold optical zooming.

(9) Preset Alarm (PRESET ALM)

Alarm signals are output in the following cases if ON is selected.

•When a preset positioning sequence is completed while AUTO MODE is set to SEQ.

•When a preset positioning sequence is completed while AUTO MODE is set to SORT.

•When positioning to the starting point is completed while AUTO MODE is set to AUTO PAN.

•When the self-return function has returned the camera to its home position.

•When preset positioning is completed by manual operation.

•When positioning to the starting point is completed while PATROL is set to PLAY.

(10)Image Hold (IMAGE HOLD)

The camera picture remains as a still image on the monitor screen or until the camera reaches the preset position. This function is useful for surveillance via a local area network.

●Camera

(1)Camera Identification (CAMERA ID)

You can use the camera identification to assign a name to the camera. The camera ID consists of up to 16 alphanumeric characters. You can select whether to have the camera ID displayed on the moni- tor screen or not. See page 36 for the setting.

(2) Light Control (ALC/MANUAL)

You can select the mode for adjusting the lens iris. There are two modes as follows: ALC: The lens iris is automatically adjusted according to the brightness of an object.

You can select one of two modes (BLC ON or BLC OFF) of backlight compensation.

Backlight compensation is available in the ALC mode. It eliminates strong background light which makes the camera picture dark such as a spotlight.

MANUAL: The lens iris is fixed at the value that you have set regardless of the brightness of an object.

•ALC Mode with BLC ON

An important object in a scene is usually placed in the center of the monitor screen. By activating this feature, more photometric weight is given to the center of the screen than to the edge of the screen (where bright backlight would most likely be located). In such a case, the object at the center of the screen can be still clearly seen even though the backlight may vary.

See page 37 for the setting.

•ALC Mode with BLC OFF

This mode is effective when the main object in the scene is not located in the center of the screen but a source of bright light is located near the center of the scene. In this mode, the picture is divided into 48 areas that mask the light to keep the clarity of the picture.

13

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Operating Instructions Contents Important Safety Instructions EnglishFeatures PrefacePrecautions Camera CleaningPreset Data Uploading or Downloading Do not attempt to disassemble the cam- eraDo not install the camera in places sub- ject to vibrations Never aim the camera at the sunIf Over Heat appears on the monitor screen ConsumablesConstruction Setup Setup MenuFocus Switch Zoom Switch Up Switch Right Switch Left SwitchSET Key CAM SET Key Down Switch Close CAM Setup F4 key Key for 2 sec Key for 2 secoSetup Menu Description PresettingAuto Mode Auto Mode Home Position Home PositionAuto Pan Key Auto PAN KEY Digital Flip Digital FlipLocal/Remote LOCAL/REMOTE Special 1 MenuCamera Shutter Speed Shutter Gain Control AGCElectronic Sensitivity Enhancement Sens UP Synchronization SyncRS485 communication Setting Procedures Setup Menu DisplayMenu Display Submenu DisplayPresetting Preset Menu DisplayPosition Setting Position SET To Set Panning/Tilting PositionsZOOM/FOCUS setting menu Pan OffsetTo Set the Lens Zoom and Focus Positions Preset Identification Setting Preset ID To Enter a New Preset IDTo Copy a Preset ID from Another Position To Change an Entered Preset IDLight Control Setting ALC/MANUAL To Set a Display Position for a Preset IDTo Return to the Preset Setting Menu Manual setting menuScene File Setting Scene File Preset Speed Setting Preset SpeedTo Return to the Preset Number Set Menu To Return to the Setup MenuDeleting Preset Positions Home Position SettingSelf Return Setting Self Return Auto Mode Selection Auto Mode Auto PAN setting menuWhen the panning, tilting, zooming or focusing in the SEQ Auto Pan Key Setting Digital Flip Setting Digital FlipLocal/Remote Setting LOCAL/REMOTE Special 1 Menu Setting SpecialPrivacy Zone Privacy Zone Zone Scale setting menu When on Nesw is selected Area Title Nesw setting menuProportional Pan/Tilt PROPO. P/T Area Title Area TitleSetting on User Display Position setting menuDirection User setting menu Area Title EditingPatrol-learn and Patrol Play Patrol To Quit EditingArea Title menu Patrol-learn with a Controller Having the Patrol Key Patrol-learn with a Controller not Having the Patrol KeyPatrol Play with a Controller Having the Patrol Key Patrol Play with a Controller not Having the Patrol KeyAlarm Input/Output Alarm IN/OUT Alarm I/O submenuCNT-CLS 1, 2 Output Password Lock Password Lock Password VerificationCleaning Cleaning New PasswordPreset Alarm Preset ALM Electronic Zoom EL-ZOOMImage Hold Image Hold Camera Setting To Display the Camera Setting MenuCamera setting menu Camera Identification Camera IDBacklight compensation menu Turns to white Blinking Shutter Speed Setting Shutter Gain Control AGCElectronic Sensitivity Enhancement Sens UP Line-lock Sync Mode LL Synchronization SyncSync menu Auto-Tracing White Balance Mode ATW1/ATW2 ATW fine adjustment menuWhite Balance White BAL Automatic White Balance Control Mode AWC AWC fine adjustment menuMotion Detector Motion DET Motion detect menuAuto Focus Setting AF Mode Special 2 Menu SPECIAL2 Black Burst Setting Burst BW To Restore the Camera Default Position RefreshCamera Resetting Camera Reset RS485 Setup Initial Camera Communication ParametersChanging the Camera Communication Parameters Alarm Data Alarm Data Delay Time Delay TimeUnit Number Unit Number Sub Address SUB AddressInstallation PrecautionsMounting the Camera Ceiling mountPreparations Disassembling the CameraMounting the Bracket Waterproof Material X4 Screws Upper BaseSetting the Switches RS485 Parameter SetupFor Panasonic’s Protocol Unit NumberSwitch position Unit RS485 Setting Mounting the cameraAC Power Supply Connection How to Assemble the Cable with the Accessory ConnectorConnections Alarm in Connections Alarm OUT ConnectionsRS485 Connection System Connections Specifications Signal-to-noise ratioPower consumption Prevention of Blooming and SmearAccessories Optional AccessoriesWV-7176E Appendix ShortcutsN0202-1032 V8QA5996BN Imprimé au Japon Regional Offices
Top Page Image Contents