Blaupunkt BPV 660 manual Connection procedure, Preamp Out/Line Out Connections

Page 10

Connections

Warning

•To prevent short circuit, remove the key from the ignition and disconnect the battery’s (–) terminal.

•This unit is designed for negative ground 12 V DC operation only. You can not use it for 24 V or other types of car batter- ies.

Connection procedure

Caution

•DO NOT connect any speaker wires to the metal body or chassis of the vehicle.

•DO NOT connect the speaker common (–) wires to each other.

•Connect each speaker wire directly to each speaker termi- nal.

•All speaker common (–) wires must remain floating.

ie. No common connections or connection to vehicle grd.

•Connect each pair of speaker leads only to a single speaker (or speaker system) that has an impedance of least 4 ohms, as well as 57.5-watt power-handling capability.

•Do not connect speaker leads to any inputs on external amplifiers. This will cause damage to the internal amplifier of this unit.

1Make sure the car’s ignition key has been removed.

2Disconnect the negative (–) terminal of the car’s bat- tery.

3Connect the wiring harness wires in the following order : Ground wire (Black), +12V Constant Power Supply (Yellow), +12V Accessory/Switched (Red) and Power Antenna/Amplifier Turn On (Blue), and tape each so they do not come in contact with each other.

4Connect the speaker wires of the wiring harness.

5Connect the car’s antenna terminal to the antenna socket of the unit.

6Connect the detachable wire harness to the unit.

7Reconnect the negative (–) terminal of the car’s bat- tery.

8Start the car’s engine.

9Make sure the unit operates properly.

	Connection procedure	ENGLISH
	For connection to optional CD changer. Requires cable adapter # F00E500029.	ENGLISH

	To use AUX input instead of CD changer, please order part number 7 607 897 093
	in addition to F00E500029.

Preamp Out/Line Out Connections

•Since this unit has Line Level Outputs, you can use an amplifier to upgrade your vehicle stereo system.

RCA Line-out Jacks

White (Left)

Red (Right)

External Amplifier

Rear Speaker

RCA Line-out Jacks (For Rear Speakers)

•Connect a patch cable (not supplied) from the White (left rear channel) and Red (right rear channel) RCA line output jacks of the unit to the line input terminals of the external amplifier.

E-9

BPV660(EN)_body

9

1/22/02, 10:49 AM

Image 10

Contents Issue date 12-01 288F0470 English Français Português EspañolPrecautions Handling the Front Panel English Remote Control OptionalIdentification of Controls Front Panel LCD DisplayGeneral Operations Turning the power On/Off Setting the ClockVolume Level Control and Memory Display Priority SelectorSwitching the Source Selecting auxiliary input Adjusting the Sound CharacteristicsTip Radio Reception Playing the CD player CD OperationsTips CD Changer Controls Playing the CD ChangerSupplied Mounting Hardware InstallationsPrecautions Mounting ExamplePreamp Out/Line Out Connections Connection procedureConnections RCA Line-out Jacks For Rear SpeakersReturning to the Initial Settings MaintenanceCleaning the Connectors Replacing the FuseCD Changer Troubleshooting Troubleshooting Guide SpecificationsCD Player Troubleshooting GeneralPrécautions Manipulations de la face avant Identification des touches Télécommande optionFace avant Affichage à cristaux liquides LCD Mise sous et hors tension Réglage et mise en mémoire du niveau du volumeUtilisation générale Réglage de l’horlogeRemarque Réglage des caractéristiques sonoresAstuce Réception Radio Functionnement du lecteur CD Commandes du changeur de CD Utilisation du changeur de CDÇais InstallationMatériel de montage fourni PrécautionsExemple de raccordement BranchementsMéthode de branchement Raccordement des sorties du préampli/de ligneEntretien AisçGuide de dépannage Spécifications techniques FranFrontal extraíble EspañolFrontal extraíble Pantalla LCD Identificación de los mandosMando a distancia opcional Cómo encender y apagar la unidad Puesta en hora del reloj Control y memorización del nivel del volumenFuncionamiento básico Selector de prioridades de pantallaEspa Cómo ajustar las características del sonidoCómo cambiar la fuente Selección de la entrada auxiliar NotaRecepción de emisoras ÑOLFuncionamiento del reproductor de discos compactos Reproducción de discos compactosMandos del cargador de discos compactos Cómo reproducir discos con el cargadorMontaje PrecaucionesConexiones de preamplificación y ajuste de varios circuitos ConexionesProcedimiento de conexión Precaución AdvertenciasCómo cambiar el fusible Cómo recuperar la configuración inicialMantenimiento Cómo limpiar los conectoresRecepción de las emisoras Guía para la solución de problemas Características técnicasProblema Causa/Solución Reproductor de discos compactosRemoção do painel frontal Precauções Manuseamento do painel frontalFixação do painel frontal Manuseamento de discos compactosPortuguês Identificação dos ComandosPainel Frontal Visor LCD Controlo remoto OpcionalActivar e desactivar Acertar o Relógio Memorização e Controlo do Nível de VolumeOperações Gerais Selector de prioridade do visorMudar a Fonte seleccionar a entrada auxiliar Regulação das Características do SomSugestão Recepção de Rádio PortuguReprodução do leitor de CD Utilização do leitor de CDSugestões Controlos do permutador de CDs Utilizar o permutador de CDsMaterial de Montagem Fornecido InstalaçõesPrecauções Procedimento de Ligação LigaçõesProcedimento de ligação Cuidado Ligações de Saída de Linha/Pré-amplificadorRetirar a unidade ManutençãoSubstituição do Fusível Limpeza dos conectoresProblema Causa/Solução Guia de Resolução de Problemas EspecificaçõesResolução de Problemas do Leitor de CD Geral