Cateye EC-C400R instruction manual Attach the pedals, Attach the control unit base to control unit

Page 9

6	Attach the pedals.
	¥ Use the No.15 end of the spanner to attach the pedals firmly to the

cranks.

¥ The right and left pedals are different, so be sure to check for R and L marks.

¥ Tighten the right pedal by turning clockwise, and the left pedal by turning counterclockwise.

Caution: If the pedals are not attached firmly enough to the crank, they can cause an irritating noise. Be sure to attach them firmly.

Crank

No.15 end of the spanner

Front

LeftRight

7	Attach the control unit base to control unit.
	Reference: Units of weight, and units of pedaling resistance can

be changed using the select switches at the back of the control unit. The settings before shipping are as fol- lows; units of weight: lbs, and units of pedaling resis- tance unit: kgám.

For information on the various settings which can be carried out with these switches, refer to the Reference section on page 48.

¥ Attach the control unit base to the back of the control unit as illus- trated and fasten the base by the 4 screws.

¥ Insert the cable connector coming out of the main unit into the cable inlet at the back of the control unit, until it clicks into place.

Caution: Ensure that the connector is completely connected. If the connection is insufficient the unit will not work.

Screw

Control unit base

Cable inlet

Cable connector

¥Place the control unit on the main unit as illustrated and fasten it by the 4 screws.

Control unit

Screw

9

Image 9

Contents RECUMBENT-C4OORBIKE Contents HOW to USE this ManualIntroduction Main body Control unit Part NamesLCD Start Guide Starting with Assembly Mount the front legMount the rear leg Mount the seat and handlebar Assemble the rear frameConnect the Inner pipe Attach the control unit base to control unit Attach the pedals2HOW to Adjust Each Part Level AdjustmentAdjust the seat position Adjust the seat height Adjust the pedal beltsRecommended exercise posture Connect the pulse sensor Connecting the Pulse SensorUse of sensor clip Use pulse earlobe sensor during exerciseTrying OUT the EC-C400RFOR the First Time Turn on power and attach earlobe sensorInsert the start card the red card provided Check the screen displayButton to start PressFinish your training Bring up the calories display by pressing Mode buttonFitness Test physical fitness test 6 Kinds of ProgramsHR control training training at a constant pulse rate Hill training training by cycling up mountainsQuick start training at any desired pedal resistance Interval training exercise + relief periodsUsing the EC-C400RWITHOUT a Data Card Turn on the power supplySelect a training program Input training conditions Finish your exercise Start your exerciseCheck your exercise record by scrolling the screen Operation Guide Page Training goals 1TRAINING GoalsDifference between heart rate and pulse rate Maximum Heart RatePulse Limit Target Pulse RateHR control training 2YOUR Strength Level and Training IndexConstant wattage control training Hill trainingQuick start training Interval trainingSelect the Fitness test program 3FITNESS TestInput the conditions Start the programTest result display and cool down Finish the Fitness testEnd the program Physical Fitness Level PFL 4FITNESS TestMaximum Oxygen Uptake MOU Maximum Physical Work Capacity PWC maxMale Test Protocol5HR Control Training Select the HR control training programStart the warm-up Continue the training, maintaining the target pulse Select the Constant wattage control training program 6CONSTANT Wattage Control TrainingIbly, and the pedal resistance drops to the minimum Continue the training, maintaining the wattage7HILL Training Select the Hill training programStart the training Continue the training Select the Interval training program 8INTERVAL TrainingContinue the training by repeating exercise and rest Select the Quick start program 9QUICK StartCool-down display or the end display Specify program 10HOW to Make a Data CardSpecify age Specify exercise timeSample data cards Specify training targetReference Guide Page CHEST-BELT Heart Rate Sensor Use the wireless chest-belt heart rate sensorMaintenance of the chest-belt heart rate sensor Other Useful Functions Change the units of weightTroubleshooting TroubleshootingAbout the repair service warranty Daily Maintenance Repair Service WARRANTY/ADDITIONAL PartsProduct Specifications