Whirlpool GHW9300PW0 manual Installation Requirements, ToolsandParts, Options

INSTALLATION REQUIREMENTS

ToolsandParts

Gather the required tools and parts before starting installation. The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses

■Pliers (that open to 1⁹⁄₁₆" [39.5 mm])

■Flashlight (optional)

Tools needed for installation

■Open end wrench 17 mm and 13 mm

■Level

■Wood block

■Ruler or measuring tape

Parts supplied:

Beaded strap Transport bolt hole plug (4)

Alternate Parts

Your installation may require additional parts. If you are interested in purchasing one of the items listed here, call the toll-free number on the cover or in the “Assistance or Service” section.

If You Have	You Will Need to Buy
Laundry tub or	Sump pump system (if not already
standpipe taller	available)
than 96" (2.4 m)
Overhead sewer	Standard 20 gal. (76 L), 30" (76.2 cm)
	tall drain tub or utility sink and sump
	pump (available from local plumbing
	suppliers)
Floor drain	Siphon break, Part Number 285834;
	additional drain hose
	Part Number 8318155; and connector
	kit, Part Number 285835
Drain hose too	4 ft (1.2 m) drain hose extension kit,
short	Part Number 285863
Water faucets	2 longer water fill hoses:
beyond reach of	6 ft (1.8 m) Part Number 76314,
fill hoses	10 ft (3.0 m) Part Number 350008

Options

Pedestal

You may order a pedestal separately for this washer. This pedestal will add about 13" (33 cm) to the height of your unit for a total height of approximately 51" (130 cm).

Optional pedestal

To order, call the dealer from whom you purchased your washer or refer to the “Assistance or Service” section of this manual.

13" (33 cm) Pedestals

Color Part Number

WhiteLAB2700MQ

BiscuitLAB2700MT

PewterLAB2700ML

Stack Kit

Are you planning to stack your washer and dryer? To do so you will need to purchase a Stack Kit.

To order, call the dealer from whom you purchased your dryer or refer to the “Assistance or Service” section of this manual. Ask for Part Number 8541503.

4