Load is wrinkled
Did you unload the washer promptly?
Unload the washer as soon as it stops.
Did you use the right cycle for the load being washed? Use the Delicate speed setting.
Bid you overload the washer?
The wash load must be balanced and not overloaded. Loads should move freely during washing.
Are the hot and cold water hoses reversed?
Check to be sure the hot and cold water hoses are connected to the right faucets. See "installation Instructions."
Load is tangled or twisted
•Did you overload the washer?
See "Starting Your Washer" for maximum load size. Loads should move freely during washing.
Gray whites, dingy colors
•Bid you properly sort the load?
Dye transfer can occur when mixing whites and colors in a load. Sort dark fabrics from whites and lights.
Was the wash temperature too low?
Use hot or warm washes if safe for the load. Make sure your hot water system is adequate to provide a hot water wash.
Did you use enough detergent, or do you have hard water?.
Use more detergent for washing heavy soils in cold or hard water. Water temperature should be at least 70°F (21°C) for soap to dissolve and work properly.
Did not get CATALYS'P Cleaning Action
•Did you set the Cycle Selector Control (Timer) knob on the blue oval labeled CATALYST_?
The blue oval labeled
Cycle Selector Control (Timer) knob for it to be included in a wash cycle.
CATALYST " Cleaning Action is available only in the Ultra Clean and Whitest Whites cycles.
Garment damage
•Check the following:
Were sharp items removed from pockets before washing? Empty pockets, zip zippers, snap or hook fasteners before washing.
Were strings and sashes tied to prevent tangling?
Were items damaged before washing?
Mend rips and broken threads in seams before washing.
•Did you overload the washer?
See "Loading" for maximum load size.
Bid you properly add chlorine bleach?
Do not pour chlorine bleach directly on load. Use your liquid chlorine bleach dispenser. Wipe up bleach spills. Undiluted bleach will damage fabrics. Do not place load items on top of the bleach dispenser when loading and unloading the washer.
•Bid you follow the manufacturer's care label instructions?
Wash/Rinse temperature is not what I selected
•Are the hot and cold water inlet hoses reversed?
As washing progresses, the wash temperature will decrease slightly for hot and warm washes. This is normal.
To reduce wrinkling, the warm rinse is regulated to be cooler than the warm wash.
18