Maytag MAH-24 important safety instructions Turn the Washer On, Select Cycle

Using the Controls

STEP 1

Turn the Washer On

Press any pad or turn the cycle selector knob to turn the washer on. Press the Power Off pad to turn the washer off.

If the washer power is left on for longer than 10 minutes without starting the washer, the power automatically turns off.

STEP 2

Select Cycle

Turn the cycle selector dial to select the appropriate cycle for your load. The indicator light by the cycle name will illuminate.

•Rinse & Spin – For all fabrics needing a rinse and spin only.

•Spin – For all fabrics and garments needing a spin only.

•Drain – To drain water from tub without spinning.

•Quick Wash – For lightly soiled or wrinkled garments needed quickly. For best results, use liquid detergent.

•Heavy Duty – For sturdy, colorfast fabrics and heavily soiled garments.

•Normal – For most fabrics including cottons, linens and normally soiled garments.

•Colors – For bright fabrics or fabrics that may bleed.

•Wrinkle Control – For “wash and wear” and synthetic fabrics and lightly to normally soiled garments.

•Delicates – For sheer fabrics, bras and lingerie.

•Handwash – For wool, silk and other hand-wash- only fabrics. For best results, use liquid detergent.

Note

•To minimize wrinkling of loads, select the Wrinkle Control cycle.

4