Pioneer DJM-800 operating instructions Connections Connecting Inputs

CONNECTIONS (CONNECTING INPUTS)

Always turn off the power switch and disconnect the power plug from its outlet when making or changing connections.

CONNECTING INPUTS

Pioneer DJ CD players

Connect a DJ CD player’s audio output connectors to one of the channel 1 to 2 CD input connectors or the channel 3 to 4 LINE input connectors, and connect the player’s control cable to the corresponding channel’s CONTROL connector.

Set the connected channel’s DIGITAL/CD switch or DIGITAL/LINE switch to either [CD] or [LINE], and set the input selector switch to

[CD/DIGITAL] or [LINE/DIGITAL].

When making digital connections, connect the digital coaxial output terminal of the DJ CD player to one of the channel 1 to 4 DIGITAL IN connectors of the DJM-800; then set the corresponding channel’s DIGITAL/CD switch or DIGITAL/LINE switch to [DIGITAL], and the input selector switch to [CD/DIGITAL] or [LINE/DIGITAL].

Connecting other line level output devices

To use a cassette deck or other CD player, connect the component’s audio output connectors to one of the channel 3 to 4 LINE input connectors. Then set the corresponding channel’s DIGITAL/LINE switch to [LINE], and the input selector switch to [LINE/DIGITAL].

Alternately, connect the component to the channel 1 LINE input connector, then set the channel 1 input selector switch to [LINE].

Connecting other digital output devices

To use a CD player or other component with digital connections, connect the component’s digital coaxial output connectors to one of the channel 1 to 4 DIGITAL IN connectors; then set the corresponding channel’s DIGITAL/CD switch or DIGITAL/LINE switch to [DIGITAL], and the input selector switch to [CD/DIGITAL] or [LINE/DIGITAL].

English

Analog turntable

To connect an analog turntable, connect the turntable’s audio output cable to one of the channel 2 to 4 PHONO input connectors. Set the corresponding channel’s input selector switch to [PHONO]. The DJM-800’s PHONO inputs support MM cartridges.

Connect the turntable’s ground wire to one of the DJM-800’s SIGNAL GND terminals.

÷Note that no PHONO input connector is provided for channel 1.

DIGITAL/LINE switch DIGITAL/CD switch

Input selector switch

SIGNAL GND

SIGNAL GND

DIGITAL IN

MASTER 2

REC

PHONO

LINE

PHONO

LINE

PHONO

CD

LINE

L

CD

L

L

L

L

POWER

OFF

ON

CONTROL

CONTROL

CONTROL

CONTROL

MIDI OUT

1GND

R

R

R

R

DIGITAL OUT

R

fs (Hz)

2HOT

DIGITAL

DIGITAL

DIGITAL

DIGITAL

AC IN

3COLD

LINE

LINE

CD

CD

48 k

96 k

MASTER ATT -3dB0dB

-6dB

-12dB

R

MASTER 1 L

ADD

CUT

R

BOOTH

L

R

SEND L(MONO)

R

RETURN L(MONO)

MIC SIGNAL

(TRS)

L R L R R L L R L R L R

CD player, etc.

Analog turntable Analog turntable DJ CD player DJ CD player Cassette deck, etc.

5

<DRB1392> En