A&D AD-4405 manual Description of Panels and symbols, Front Panel Description

4. Description of Panels and symbols

4.1.1.Front Panel Description

1

2

3

4

8

9

567

10

N	Name		Description
o.
1	STABLE	Indicates when the display is stable.
2	NET	Indicates when the display is the net weight.
3	ZERO	Indicates when the display weight is in the Zero range.
4	Annunciator	lndicates various weighing status or functional selection.
	PT	Indicates when PRESET TARE value is being used.
	READY	Indicates the state of comparison or batching.
	M+ (Accumulation)	Indicates when there is a result of addition or accumulation.
	1,2,3(Triangle)	Depending on the function selected, Indicates various states.
5	MAIN display	Displays the weight, accumulation data or setting parameters.
6	UNIT part	Unit used to weigh.
7	HI/OK/LO	Indicates the results of comparison.
8	Capacity label	Capacity and division (this label is included in the accessories).
9	Key switches	Selects the display, settings or data output.
	CODE key	The key to select the code memory.
	SAMPLE key	The key to set the unit weight for the counting function.
	SETPOINT key	The key to set the comparator value.
	PT key	The key to set the PRESET TARE value.
	TOTAL key	The key to display the total weight.
	M+ key	The key to display the total weight.
	START key	The key to start comparison / batch weighing.
	STOP key	The key to stop comparison / batch weighing.
	FEED key	The key to feed the paper of the optional Built-in Printer.
	MODE key	The key to switch unit used to weigh.
	0 – 9 key	The key to input any numerical settings.
	A – F key	Used to enter setting values (press NET/GROSS key at a time).
4. Description of Panels and symbols			Page 8	AD-4405 Weighing Indicator