A&D AD-4405 manual Data Output

Data Output

	Item	Parameter	Description
		** 0	No data output
f30		1	Analog output		Set f31, 32, 33
Data output		2	Serial output	RS-232C,
		3	Serial output (Zero suppressing)	RS-422/485
*:	Initial settings.
Analog Output
	Item	Parameter	Description
f31		* 0	Displayed data
		1	Gross data
Output data
		2	Net data
f32		-999999 to 999999 (Initial setting is 0)		Polarity is
Weight value at 4mA output				changed by
f33		-999999 to 999999 (Initial setting is		pressing the +/-
Weight value at 20mA output		10000)		key.
*:	Initial settings.
Serial Data Format
	Item	Parameter	Description
		x 0	Terminator			key :
					ZERO
f34		x 1	Device ID (selected at f06)
	[Type3]			order of output
		x 2	Code number
Serial data format 1				(1-999)
		x 3	Data number *
				“Exxx” indicates
		x 4	Result of comparison
Initial value				the end of data
		x 5	Date
19, 2e, 3a 4f e50				to output
		x 6	Time
		x 7	Accumulated value				key:
					NET/GROSS
		x 8	Accumulation count
				Expand or
f35		x 9	Stable / Over
	[Type3]			shorten output
		x a	Displayed weight
Serial data format 2				data length
		x b	Gross weight
Initial value		x C	Net weight		0 - 9 , A - F key
		x d	Tare weight
17 2f e30				output data
		x e	Weight type (G /N / T, refer to Cf06)
		x f	Weight unit (cf. Cf07)

1The comma of the parameter display indicates that the comma (f46 0, semi-colon for f46 1) is output after the data. To turn this mark on and off, press the 9 key while pressing NET/GROSS key.

Output of the initial settings of f34(19, 2E, 3A 4F E50) is like “ST,GR,+12345.6kg”.

2The data number *(parameter 3) increments automatically with each serial data output from 1 to 99999 (the next of 99999 is 1). The starting number can be set using the keys.

AD-4405 Weighing Indicator Page 27 6.2. F-Functions