A&D AD-4405 manual Setting the Interval Time, Interval Data Output / Print output

15.3.1.Setting the Interval Time

Step 1 By pressing the SETPOINT(3) key while pressing the PRINT key, be displayed for 2 seconds.

intval

will

Step 2 Select which interval time to set using the following keys. The item is displayed.

MODE		.......key		The key to select serial output	int 5i	or printer	int p	to set.
				The key to return to the weight display.
ESC	..........key
				The key to proceed to the time setting (Step 3).
ENTER			......key

Step 3 Set the interval time using the following keys. The key operation is the same as the

time settings.
0 - 9 key			The key to set the value at the blinking digit, then the blinking
			digit shifts to the right. (Illegal numbers are ignored) .
+/- key			The key to shift the blinking digit to the right.
		key	The key to reset the settings and display the interval time stored
CLEAR
			in memory.
			The key to return to Step 2 without changing the interval time
ESC	..........key
			settings.
			The key to store the interval time then return to Step 2.
ENTER		key

15.3.2.Interval Data Output / Print output

Set the data output mode or print mode to “Manual mode” respectively to interval data output or print out.

By pressing the START(7) key while pressing the PRINT key the interval timer starts and the first data is output or printed.

At the start, the internal printer prints the interval time setting first.

By pressing the STOP (8) key while pressing the PRINT key the interval timer stops and the data at that time is output or printed. The internal printer prints “Intv. Stop” before printing the data.

The internal printer prints unstable data in the interval print mode.

The internal printer replaces over-range data with spaces and decimal point.

AD-4405 Weighing Indicator Page 55 15. Common Printer and Data Output