A&D AD-4405 manual Parameter

Output of Accumulated Data

Accumulated data can be output to the serial interface.

Output by manual or automatic, and output data format is selected at f41 of the F-function setting.

f41	Parameter	Manual/Automatic	Format
	0	No output
Accumulated data	* 1	Manual	Fixed format
	2	Automatic
output at
	3	Manual	Format 1(selected at f34)
accumulated data
	4	Automatic
display
	5	Manual	Format 2(selected at f35)
	6	Automatic

Step 1 Press the TOTAL key to display total and the accumulated data. Step 2 If automatic output is set, the data is output once at that timing.

Step 3 If manual output, by pressing the PRINT key while the accumulated data is displayed, the data is output.

Fixed data format :

Print out of Accumulated Data

Accumulated data can be print out by the internal printer.

Print out by manual or automatic, and output print format is selected at f61 of the F-function setting.

f61	Parameter	Manual/Automatic	Format
Accumulated	0	No printout
	1	Manual	Format 1(selected at f70)
data print out at
	2	Automatic
accumulated
	* 3	Manual
data display			Format 2(selected at f71)
	4	Automatic

Step 1 Press the TOTAL key to display total and the accumulated data. Step 2 If automatic print is set, the data is printed out once at that timing.

Step 3 If manual print, by pressing the PRINT key while the accumulated data is displayed, the data is printed out.

8. Accumulation Page 36 AD-4405 Weighing Indicator