Lucent Technologies 8405 manual Press Personal List, Drop

To see the number stored on an Abbreviated Dialing (AD) button

1Press the selected AD xxxxx while on-hook

∙ Stored number is shown

2 Press Exit to return to the normal display or repeat Step 1 to see another number

To place a call using an	1 Press the selected	AD xxxxx	(while off-hook)
Abbreviated Dialing (AD)	∙ Call is automatically dialed			[ringback tone]
button

To program or reprogram an outside number, extension, or feature access code into a personal list

1On a separate sheet of paper, write down the outside numbers, extensions, and/or feature access codes you want to program as items on your personal list

2If you are using an 8405 with a display, press Menu and then press the softkey below Prog

(while off-hook)

If your 8405 does not have a display, press Program (while off-hook)

or the Dial Abbreviated Dialing Program access code __________ (while off-hook)

[dial tone]

3Press Personal List

or Dial the Personal List code __________

4Dial the desired list item number (for example,

0 through 9, 01 through 95, and so on, depending on

list size) [dial tone]

5Dial the outside number, extension, or feature access code you want to store

Note: If your 8405 has a display, you may be able to use the softkeys to add special functions such as Pause, mark, or Wait into the telephone numbers programmed on the AD button.

6Press Personal List (if you used Personal List in Step 3)

or Press # (if you used an access code in Step 3)

[confirmation tone]

∙Number is stored

∙Repeat Steps 3 through 6 if you want to program additional items on the same list

7Hang up or press

Drop

to end programming

∙If you want to continue programming, begin again at Step 1 to program another personal list

18