Lucent Technologies 8405 manual Last Number Dialed, Leave Word Calling LWC

To automatically redial

1

Press

Last Dialed

(while off-hook)

the last number you

or Dial the Last Number Dialed access code

dialed (up to 24 digits)

__________ (while off-hook)

(extension, outside

∙ Number is automatically dialed

number, or trunk/feature

access code)

Note: Available with a DEFINITY Generic 2 and

with System 85 R2V4 and some R2V3 systems.

Check with your system manager to learn if the

feature is available on your system.

Limitations on this feature should be noted. Digits

dialed via Abbreviated Dialing, feature dial codes,

authorization codes, and Station Message Detail

Recording (SMDR) account codes are not retained in

memory and must be redialed for each call.

To see the number you

1

Press

(while on-hook)

Last Dialed

last dialed (you must have

∙ Last number dialed is shown on the display screen

a voice terminal with a

To leave a message after

1 If you are using an 8405 with a display, press

Menu

dialing an extension

and then press the softkey below LWC after you

(when call is not

complete dialing

answered, or you hear a

If your 8405 does not have a display, press

any

LWC

coverage or busy tone)

time after you complete dialing

[confirmation tone]

∙ Message light goes on at the called voice terminal

(if so equipped)

Note: If reorder tone is heard, the message is not

stored; try again.