Lucent Technologies 8405 manual Reset Speakerphone

Page 36
Reset Speakerphone

Reset Speakerphone

Important: You can use this feature only if you are using an 8405B Plus or

8405D Plus voice terminal, if the Reset Spkr label appears under the Speaker button, and if your voice terminal is set for the Speakerphone feature (as opposed to the Speaker feature). If you do not have a Shift button or the Reset Spkr label on your 8405B Plus or 8405D Plus, you do not need to manually activate this feature.

If your 8405B Plus or 8405D Plus is equipped with this feature, you can adjust the speakerphone to the surrounding room acoustics to provide optimal performance. Use the Reset Speakerphone feature in the following ways:

∙Whenever you move your voice terminal to another place (even in the same room)

∙Whenever the red light next to Speaker is fluttering

Note: You may also use this feature when you are on a call in the unlikely event your speakerphone makes a squealing noise during the call. Your speakerphone will adjust itself to normal for that call. (No tones will be heard.)

Important: If there has been an interruption in power (such as, the system has just been powered up again, or you have plugged in the voice terminal at another location), the light next to Speaker flutters until you reset the built-in speakerphone.

You can initiate the Reset Speakerphone feature when your handset is on-hook, or during a call in which you are using the built-in speakerphone. (If a call is in progress, you will not hear the tones, and the new speakerphone adjustment is reset for only the duration of that call.)

Remember you can use the Reset Speakerphone feature only if your voice terminal is set for the Speakerphone feature (as opposed to the Speaker feature).

When you first power up the 8405D Plus voice terminal, the following display appears.

PLEASE RESET SPKR.

BeginCancel

To reset the speakerphone 1

Press the softkey below Begin to reset the

(when the 8405D Plus

speakerphone

voice terminal is first

(Press the softkey below Cancel if you do not want to

powered up)

reset the speakerphone at this time. However, note

 

that the red light next to

Speaker

will continue to

 

flutter.)

 

∙ If you press the softkey below Begin, the display

 

shows the following timed screen:

 

 

 

 

 

 

OPTIMIZING PERFORMANCE

 

 

 

OF THE SPEAKERPHONE.

 

 

 

 

 

 

 

32

Page 35 Page 37
Image 36
Page 35 Page 37
Contents 555-104-726 Comcode 107985574 Issue June DEFINITY Communications System Generic 2 and System8405 Voice Terminal User’s Guide TO ORDER COPIES OF THIS DOCUMENT Contents Exit Normal Inspect Message Retrieval Normal Exit Time/Date Timer Quick Reference ListsYour 8405 Voice Terminal Figure 1. One Version of the 8405B and 8405B Plus Voice TerminalVolume Handsetcontrol buttonFigure 4. Another Version of the 8405D and 8405D Plus Voice Terminal A handset is provided for placing and receiving calls If your 8405B Plus or 8405D Plus has the Reset Spkr label For adjusting the volume of the following A Quick Look at the Features Voice FeaturesPage Page Display Features and Features Used with the Softkeys Normal See “Exit.”How to Use the Features General InstructionsConventions Used in The Following Procedures Troubleshooting Later in This GuideQuick Reference Lists at the Back of This Guide MeaningsUsing the Display, Softkeys and Display Control Buttons Entering Softkey Mode and Viewing the Three Feature Option ScreensFigure 6. The Three Feature Option Screens Using the Softkeys to Activate a Feature To reset the speakerphone automatic. No user response is requiredVoice Feature Procedures Abbreviated Dialing ADHandset and Speaker 3 Press Personal List 6 Press Personal List if you used Personal List in StepDrop Automatic Callback Bridging/Manual Exclusion Auto CallbackSpeaker Call Coverage/Consult Coverage CallbackConsult Call Forwarding - Busy/Don’t Answer Call Forwarding - Follow Me Call Park Call Pickup ConferenceHandset Volume DropHANDSET L H Hold Intercom Automatic/DialIcom Auto Last Number Dialed Leave Word Calling LWCTo leave a message Message MutePriority Calling Reset Speakerphone Select Ring and Ringer Volume 4 When you hear the desired ringing pattern press Shift again Send All Calls RINGER L HSpeaker Send All CallsSPEAKER L H MuteSpeakerphone 1 Press Mute Test TransferDisplay Feature Procedures Exit NormalInspect Call InformationMessage Retrieval 1 Press Inspect1 Press Message Retrieve Return CallNormal Exit Time/DateTimer TimerTones and Their Meaning Ringing TonesFeedback Tones Troubleshooting ProblemSolution Problem Key Words to Know access code See feature access codeparty A person who places or answers a call Page Page FEATURE ACCESS CODES FeatureCode CancelAbbreviated Dialing MiscellaneousTrunk Codes Description
Related manuals
Manual 31 pages 1.6 Kb Manual 10 pages 42.22 Kb
Top Page Image Contents