Lucent Technologies 8405 manual Priority Calling

Priority Calling

You can access this feature with the softkeys only if your voice terminal has a display.

To place a priority call	1	If you are using an 8405 with a display, press			Menu
(3-burst ring)		and then press the softkey below PCall
		(while off-hook)
		If your 8405 does not have a display, press
				Priority
		(while off-hook)
		or Dial the Priority Calling access code __________
		(while off-hook)	[dial tone]
	2	Dial the extension	[ringback tone]

∙Wait for the called party to answer

To change a regular call into a priority call (3-burst ring) when you hear a call-waiting ringback tone

1If you are using an 8405 with a display, press Menu and then press the softkey below PCall

If your 8405 does not have a display, press Priority

∙Called party receives a priority call-waiting tone (3-burst ring)

2Wait for the called party to answer

Note: If you still receive a call waiting ringback tone, wait a few minutes and try again.

31