Lucent Technologies 8405 manual When you hear the desired ringing pattern press Shift again

4 When you hear the desired ringing pattern,

press Shift again

∙ Your new ringing pattern is set

∙ If you have an 8405D or 8405D Plus, you hear confirmation tone (two rising tones)

To select a personalized			1	While on-hook, press
							Ring
ring (for those 8405 voice
				∙ Red light next to
terminals which have a								winks
						Ring
		button)
	Ring			∙ Current ringing pattern plays and repeats every
				three seconds.
				∙ If your 8405 has a display, it shows the ringing
				pattern you are hearing, such as:
					SELECT RING PATTERN: 1

2Cycle through the ringing patterns by pressing (and then releasing) Ring

∙Red light next to

Ring

continues to wink

∙The display shows the number of the ringing pattern you have selected

Note: If you are using a display set, you can also press Next or Prev to cycle through all eight ringing patterns.

3If you want to save the ringing pattern currently being played, do not press Ring anymore. You will hear the selected ringing pattern two more times, and then it will be automatically saved.

∙You hear confirmation tone (two rising tones)

∙Red light next to Ring goes off

Note: If you receive a call, go off-hook, or lose power during selection, the process is interrupted and you must start again.

34