Lucent Technologies 8405 manual Send All Calls, Ringer L H

To adjust ringer volume	1 To raise the volume, press the right half of the
if necessary (handset and	Volume control button labeled	;
speaker are not active, or	to lower the volume, press the left half of the
the handset and ringer	Volume control button labeled
are both active)	∙ If you have a display, it shows:

RINGER L>>>>> H

(There are eight possible volume settings. On the display, one arrow is the lowest setting, and eight arrows is the highest setting.)

One full ring cycle will sound to demonstrate the new volume.

Send All Calls

To send all incoming calls (except priority, intercom, and personal central office calls) immediately to an assigned extension, AUDIX, or message center for coverage

1Press Send All Calls

(while on-hook or off-hook)

or Pick up the handset and dial the Send All Calls

access code __________ [confirmation tone]

Note: You may hear a half ring as each call is sent to coverage if you have a DEFINITY Generic 2 or a System 85 R2V4.

35