Lucent Technologies 8405 manual Call Coverage/Consult, Coverage Callback

Call Coverage/Consult

To answer a call for a coworker for whom you are a coverage point

1Press the call appearance button of the incoming call when ring begins or green light flashes

Note: The call is not at your terminal until the green light is flashing.

To leave a message telling	1 Press	Coverage Callback	while connected to the call
a coworker to call the			[confirmation tone]
original caller’s extension	Note: To leave a message telling a coworker to call
	you, activate Leave Word Calling instead.

To use the Consult feature to talk privately with a coworker after answering a redirected call

1 Press Transfer or Conf [dial tone]

∙Call is temporarily put on hold

2 Press Consult [priority ring to coworker]

or Dial the coworker’s extension

[single-burst ring to coworker]

Note: You can privately discuss call; if coworker is not available, press the call appearance button next to the fluttering light in order to reconnect to call.

If your coworker has activated Send All Calls, you must use the Consult feature to reach your coworker.

3 Press	Transfer		again to send call to the coworker
or Press			to make it a 3-party call
		Conf

21