Max Model Setup
1.To set the OFF Time use the UP or DOWN ARROW button to scroll through numerals 0 to 9 until the desired number appears in the first HH (hour) field.
2.Press the ENTER button to lock in the selection. The next HH number field to the right flashes indicating it is ready for programming.
3.Use the UP or DOWN ARROW button to scroll through numerals 0 to 9 until the desired number appears in the second HH number field.
4.Press the ENTER button to lock in the selection.
The next number field to the right
flashes and the LED lights under MM; indicating it is ready to program the minutes fields.
5.Repeat steps 1 - 4 to set the next MM (minutes) fields.
6.After pressing the ENTER button to set the last MM field, the OFF Time informa- tion is saved.
Prelube
The Prelube function determines operation of the pump when power is applied. It can be set to OFF or ON.
OFF (default) - The unit resumes its lubrication cycle at the point it was at when power was removed.
ON - The unit begins a pump cycle.
Setting Prelube
1.After you set the OFF Time information and press the ENTER button, the G3 automatically switches to the Prelube Delay setup.
Notice the LED next to the prelube icon on the G3 display lights indicat- ing you are now in the Prelube setup mode.
2.OFF displays. If you want the prelube cycle to begin imme-
diately, leave this set to OFF.
3.Press the ENTER button to set the selection.
4.If you want to set a prelube delay time, press the DOWN ARROW button to
change OFF to ON on the display.
Prelube Delay
Prelube Delay can be entered to delay the start of the pump’s cycle on power up. If prelube is set to ON, a pre- lube delay time in MM:SS must be entered. By default, the delay is set to 0 (begin an ON cycle immediately).
Delaying the prelube function may be desired if other critical functions or systems of your machine or vehicle are also coming on line during power up.
1.Prelube Delay is set in MM:SS (minutes and sec- onds). To set the time use the UP or DOWN ARROW button to scroll through numerals 0 to 5 until the desired number appears in the first MM (minutes) field.
The maximum length of time Prelube Delay can be set to is 59:59 (59 minutes:59 seconds).
2.Press the ENTER button to lock in the selection. The next MM number field to the right flashes indicating it is ready for programming.
3.Use the UP or DOWN ARROW button to scroll through numerals 0 to 9 until the desired number appears in the second MM number field.
4.Press the ENTER button to lock in the selection.
The next number field to the right
36 | 332305B |