Alarms
Cycle /
Pressure
Fault
HH MM SS ##
ON OFF
MM : SS HH : MM
CP 1 |
|
|
CP 2 | C | 1 2 3 |
CP 3 | P |
|
! |
In pressure mode indi- cates that unit is over pres- surized or a lubrication cycle was not completed in the
In cycle mode indicates that a cycle was not com- pleted in the
LED corresponding to the affected sensor input blinks.
Could be more than one sensor alarm at the same time.
Examine system to deter- mine if you have a plugged or broken line or other component failure, i.e., divider valve, injector.
Press and hold the RESET but- ton to clear fault.
Machine Count Fault
HH MM SS ##
ON OFF
MM : SS HH : MM
CP 1 |
|
|
CP 2 | C | 1 2 3 |
CP 3 | P |
|
! |
Unit has not received the correct number of machine counts in the user defined Backup Time.
Examine system to deter- mine if the machine sen- sor is operating properly.
Press and hold the RESET but- ton to clear fault.
332305B | 59 |