MAINTENANCE
KEEP MACHINE CLEAN
Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.
Wear ANSI Z87.1 safety glasses while using compressed air.
FAILURE TO START
Should your machine fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet. Also, check for blown fuses or open circuit breakers in the line.
LUBRICATION
Apply household floor paste wax to the machine table and extension table or other work surface weekly.
PROTECTING CAST IRON FROM RUST
To clean and protect cast iron tables from rust, you will need the following materials: 1 pushblock from a jointer, 1 sheet of medium
| TROUBLESHOOTING |
BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS | |
TROUBLE! SAW WILL NOT START |
|
WHAT’S WRONG? | WHAT TO DO… |
1.Saw not plugged in. | 1.Plug in saw. |
2.Fuse blown or circuit breaker tripped. | 2.Replace fuse or reset circuit breaker. |
3.Cord damaged. | 3.Have cord replaced by authorized service center. |
4.Brushes worn out. | 4.Have brushes replaced by authorized service center. |
TROUBLE! SAW MAKES UNSATISFACTORY CUTS | |
WHAT’S WRONG? | WHAT TO DO… |
1.Dull blade. | 1.Replace blade. |
2.Blade mounted backwards. | 2.Turn blade around. |
3.Gum or pitch on blade. | 3.Remove blade and clean with turpentine. |
4.Incorrect blade for work being done. | 4.Change the blade. |
TROUBLE! BLADE DOES NOT COME UP TO SPEED | |
WHAT’S WRONG? | WHAT TO DO… |
1.Extension cord too light or too long. | 1.Replace with adequate size cord. |
2.Low house current. | 2.Contact your electric company. |
TROUBLE! MACHINE VIBRATES EXCESSIVELY | |
WHAT’S WRONG? | WHAT TO DO… |
1.Stand or bench on uneven floor. | 1.Reposition on flat level surface. |
2.Damaged saw blade. | 2.Replace blade. |
Service Information
Black & Decker offers a full network of
Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under
Accessories
Recommended accessories for use with your saw are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call:
The use of any
Full Two-Year Home Use Warranty
Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship.The defective product will be replaced or repaired at no charge in either of two ways:
The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement at our option. Proof of purchase may be required. Black & Decker owned and authorized service centers are listed under
This warranty does not apply to accessories.This warranty gives you specific legal rights and you may have other rights which vary from state to state. Should you have any questions, contact the manager of your nearest Black & Decker Service Center.
This product is not intended for commercial use.
FREE WARNING LABELREPLACEMENT: If your warning labels become illegible or are missing, call
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
See
– Yellow Pages –
for Service & Sales
25