DeWalt DS100, DS200 To Remove a Device, Change Master Code, User Code Maintenance

Page 19

To Remove a Device:

1.Use the up and down arrows to scroll through the menu until the Remove Device screen is displayed. Select OK.

2.Use the up and down arrows to scroll through the list until the device to be removed is reached. Select REMOVE.

3.The system will indicate that the device has been removed. Select OK.

CHANGE MASTER CODE

The master code enables ONLY the master user to make programming changes to the system as well as arm and disarm. The master code can be changed at any time while the system is disarmed.

1.Start at the main screen.

2.Select MENU or press MAIN MENU on the keypad.

3.Using the keypad, enter the master code.

4.Use the up and down arrows to scroll through the menu until the System Settings screen is displayed. Select OK.

5.Use the up and down arrows to scroll through the menu until the Change Master Code screen is displayed. Select OK.

6.Re-enter the current master code. This allows verification that the master user is making the change.

7.If a valid master code is entered, the system will ask for a new master code. Using the numbers on the keypad, enter a new four digit master code. Then, select OK.

8.Re-enter the new master code to confirm. Again, using the numbers on the keypad, enter the new four digit master code. The character that is being changed will be under- lined. To move back a character, use the down arrow. To move forward a character, use the up arrow. Then, select OK.

9.If the codes match, the system will confirm that the master code has been changed. Select OK.

NOTE: If the codes do not match, the Codes Do Not Match screen is displayed:

If Master Codes Do Not Match

1.Select OK.

2.The Change Master Code screen is displayed (Step 5, Change Master Code). The original master code is the default code until it is changed and verified.

USER CODE MAINTENANCE

After the initial setup, a user code and name can be added, edited or removed.

•Adding a User

•Editing a User

•Removing a User

1.Start at the main screen.

2.Select MENU or press MAIN MENU on the keypad.

3.Using the keypad, enter the master code.

4.Use the up and down arrows to scroll through the menu until the System Settings screen is displayed. Select OK.

5.Use the up and down arrows to scroll through the menu until the User Code Maintenance screen is displayed. Select OK.

Features & Options

12

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Dewalt Page DS200 DS100English Table of ContentsImportant Notices General Safety RulesLimitations of System Federal Communications Commission FCC Part 68 Statement Federal Communications Commission FCC Part StatementDS100 Base Unit Industry CanadaDS200 KEY Chain Remote DS100 Jobsite Security Portable Alarm System Base Unit Unique FeaturesPrevention of False Alarms AccessoriesDuring an Alarm Connecting the Equipment Step TWO SET Time and Date Programming for Initial SetupTelephone Connection Step ONE Choosing a LanguageList of Devices Code To Access the Reset Button on the KEY Chain RemoteIf Master Codes Do Not Match Step Four Assign DevicesStep Five Test Range ALPHA/NUMERIC Chart KEY# of presses PADArming the System Step Seven Monitoring ServiceDelays Using the KeypadArming Automatically Using the KEY Chain RemoteDisarming the System FaultsEntry Delays HOW to View FaultsDescription of Fault Codes System SettingsClearing a Fault To Clear a Tamper FaultTo Edit a Device To Add a DeviceTo Remove a Device User Code MaintenanceChange Master Code SET Console Devices To Add a UserTo Edit a User To Remove a UserClear Settings SET DELAY/INSTANTAuto ARM Time SET Auto ARM ON/OFFReview Account Choose Language Customer Service information To View Account NumberSet Date/Time To View the Mobile Identification Number MINTest Review Event LogStrobe To verify, follow these stepsPhone Line Console DevicesMotion Detector Wireless DevicesExternal Sirens Turn System Off Battery MaintenanceBase Unit Battery If You Lose Your Master CodePatent Notification Contact Full One Year WarrantyCoverage Map Meaning Action Required Alarm CodesDefault E-mail Cell Phone Text Message CodesEvent Code Description Action Description of Event CodesProblem Solution Troubleshooting GuidePIR Glossary of TermsFrançais Table des matières Consignes importantes Règles de sécurité GénéralitésCalibre AWG Normes Limites du systèmeBase DS100 Télécommande PORTE-CLÉS DS200Industrie Canada AvertissementCaractéristiques uniques Prévention des fausses alertes AccessoiresConnexion de l’équipement Pendant une alerteÉtape Deux Réglage DE L’HEURE ET DE LA Date Programmation de la configuration initialeConnexion téléphonique Étape UN Choix DE LA LangueÉtape Quatre Assignation DES Dispositifs Étape Trois Configuration DU Code MaîtreSi les codes maître ne cadrent pas Étape Cinq Test DE Portée Diagramme ALPHA/NUMÉRIQUE ClavierListe des dispositifs Code AppuyerArmement du système Étape Sept Service DE SurveillanceÉtape SIX Addition D’UTILISATEURS Délais Utilisation DE LA Télécommande PORTE-CLÉSUtilisation DU Clavier Désarmement du système Configuration DES DélaisArmement Automatique Pour éliminer une erreur due à une altération ErreursComment Afficher LES Erreurs Effacer UNE ErreurEntretien DES Dispositifs Sans Fils Options du systèmeDescription DES Codes D’ERREURS Description DES Codes DerreursPour supprimer un dispositif Pour modifier un dispositifMise À Jour DU Code Utilisateur Changer LE Code MaîtrePour ajouter un utilisateur Pour modifier un utilisateur Configuration DES Dispositifs DE ConsolePour supprimer un utilisateur Option DÉLAI/INSTANT Configuration DE L’ARMEMENT AutomatiqueRéinitialisation DES Options Revue DU Compte Mise À L’HEURE DE L’ARMEMENT AutomatiqueChoisir LE Langage Réglage heure/datePour afficher le numéro de compte Pour afficher le numéro d’identification mobile NIMExécution D’UN Test Revue du rapport dactivitésSituation DU Rapport D’ACTIVITÉS Description DES ÉvènementsStroboscope Pour le vérifier, suivre les étapes ci-aprèsLigne Téléphonique Dispositifs DE ConsoleDétecteur de mouvements SirèneDispositifs Sans FIL Arrêt du système En cas de perte du code maîtreEntretien des piles Déclaration de brevet Contact Garantie complète dun anAppendice Carte de la zone de couverture cellulaire analogiqueMauvPileBse Codes DES Voyants DEL Continu Clignotant ÉteintCodes DES Messages Textuels DU Telephone Cellulaire Diagramme ALPHA/NUMÉRIQUEAppuyer Code dévènement Description Action Description DES Codes DévènementRadio Cell NON Validé Guide de dépannage Problème SolutionGlossaire Español Índice Notificaciones importantes Instrucciones de seguridad generalRestricciones del sistema Notificaciones Reglamentarias Control Remoto DE Llavero DS200 Ministerio de Industria de Canadá Industry CanadaAdvertencias Unidad Base DS100Características exclusivas Accesorios Prevención de falsas alarmasQue hacer durante una alarma Segundo Paso Programación DE Hora Y Fecha Programación de la configuración inicialConexión telefónica Primer Paso Elección DEL IdiomaSi los códigos maestros no corresponden Tercer Paso Fijación DEL Código MaestroCuarto Paso Asignación DE LOS Dispositivos Quinto Paso Prueba DE Alcance Lista de dispositivos CódigoCuadro Alfanumérico # de veces presionadoSéptimo Paso Monitoreo DEL Servicio Sexto Paso Agregar UsuariosUSO DEL Control Remoto DE Llavero Armado del sistemaRetrasos USO DEL TecladoArmado Automático Desarmado del sistemaRetrasos DE Entrada Para despejar una falla por alteración FallasCómo VER Fallas Cómo Despejar UNA FallaCódigo de falla Falla en pantalla Descripción Acción Configuraciones del sistemaMantenimiento DE Dispositivos Inalámbricos Para agregar un dispositivoPara borrar un dispositivo Para editar un dispositivoMantenimiento DE LOS Códigos DE Usuario Cómo Cambiar EL Código MaestroPara agregar un usuario Para borrar un usuario Para editar un usuarioCómo Fijar LOS Dispositivos EN LA Consola Cómo Fijar LA Modalidad DE Activación RETRASADA/INSTANTÁNEA Cómo Despejar LAS ConfiguracionesFijación DE LA Hora DE Armado Automático Encendido Y Apagado DEL Armado AutomáticoRevisión DE LA Cuenta Para ver el Número de Identificación Móvil MIN Programación de fecha/horaElección DEL Idioma Descripción DE Eventos Revisión del registro de eventosPrueba Ubicación DEL Registro DE EventosDispositivos DE LA Consola Radio CelularPara verificar, siga estos pasos Línea TelefónicaDetector de movimiento SirenaDispositivos Inalámbricos Sirenas Exteriores Si pierde su código maestroApagado del sistema Mantenimiento de pilasPilas DE Dispositivos Contacto Garantía completa por un añoNotificación de la patente Pila DE LA Unidad BaseApéndice Códigos DE Luces LED LUZ LED Sólida Destellante Apagada Notificación por Códigos DE Mensajes DE Texto DEL Teléfono CelularSignificado Acción Código de evento Descripción Acción Descripción DE Códigos DE EventosBorrado Guía de resolución de problmas Problema SoluciónGlosario Page

DS100, DS200 specifications

DeWalt has long been recognized as a leader in the power tool industry, and its DS200 and DS100 models continue this tradition by offering innovative features and reliable performance. Both models are designed with contractors and DIY enthusiasts in mind, providing durability and efficiency in various applications.

The DeWalt DS200 is a dual-speed, heavy-duty job site radio designed to withstand the rigors of construction environments. It boasts an impressive 20V MAX lithium-ion battery compatibility, allowing for extended battery life and convenience on the job site. One of the main features of the DS200 is its Bluetooth connectivity, enabling users to stream music directly from their smartphones or tablets. This added functionality allows for a more enjoyable work environment, fostering motivation and focus.

The sound quality of the DS200 is exceptional, featuring high-performance speakers and a digital sound processing system. Its rugged exterior is designed to protect it against dust and moisture, making it highly suitable for outdoor use. The DS200 also features a built-in USB port, allowing users to charge their devices while on the go. Additionally, its integrated hooks and available carrying handle offer enhanced portability, enabling easy transportation from one job site to another.

On the other hand, the DeWalt DS100 is a more compact and lightweight option, perfect for those seeking a portable audio solution without compromising on sound quality. The DS100 also supports 20V MAX lithium-ion batteries, ensuring compatibility and extending battery runtime. With its integrated Bluetooth technology, users can easily connect their devices and enjoy crisp audio performance.

The DS100's design prioritizes convenience, featuring a durable carry strap and a compact size that allows it to fit comfortably in small spaces. Despite its smaller stature, the DS100 does not sacrifice sound quality, providing rich audio capable of filling a room.

Both models exemplify DeWalt's commitment to quality and innovation. With their robust designs and advanced technologies, the DS200 and DS100 cater to the needs of modern users, making them essential tools for both professional contractors and home improvement enthusiasts. Whether in the workshop or on the job site, these audio solutions enhance productivity and elevate the working experience.
Top Page Image Contents