GE AF-300, C11 manual Carrying, Storage and transportation environment, Storage precautions

1-4 Carrying

Always hold the main unit while carrying this product.

If it is carried by the cover or parts and not the main unit, the product may be damaged or dropped. Force must not be applied to the drive cover during carrying because it is made of plastic.

1-5 Storage and transportation

Store and transportation this product under the conditions listed in Table 1-5-1.

Table 1-5-1 Storage and transportation environment

Item		Specifications
Storage temperature	-25 to +65 °C	Condensation or formation of ice must not
Transportation tem-	(-4 to +149 °F)	be caused by sudden temperature
perature
		changes.
Relative humidity	5 to 95% *1
	The product must not be exposed to dust, direct sunlight, corrosive gas,
Atmosphere	inflammable gas, oil mist, vapor, water drops, or vibration.
	There must be no salt in the atmosphere.
Air pressure	86 to 106kPa (During storage)
	70 to 106kPa (During transportation)

*1 A large change in temperature within this humidity range may cause condensation or forma- tion of ice. Do not store this product at a place where such changes occur.

[Storage precautions]

1Do not locate this product directly on a floor; place it on a rack or shelf. 2 To store the product in a severe atmosphere, pack it in vinyl sheet.

3 If the product must be stored at a place where it may be affected by humidity, insert a drying agent such as silica gel and pack it in vinyl sheet.

-14-