GE C11, AF-300 H21 PID control Feedback signal, H22 PID control P-gain, H23 PID control I-gain

Change during operation: N = impossible, Y* = possible (enabled by using

FUNC DATA

), Y= possible (enabled by using )

H21 PID control (Feedback signal)

Factory	Change during
setting	operation
1	N

This function selects a PID control feedback signal.

0 Terminal 12(0 to +10Vdc)

1 Terminal C1(4 to 20mAdc) 2 Terminal 12(+1 to +5Vdc)

H22 PID control (P-gain)

Factory	Change during
setting	operation

0.01Y

This function sets a P-gain.

0. 0 1 to 1 0. 0 P-gain from 0.01 to 10.0 times (1 to 1000%) (in increment of 0.01 step)

H23 PID control (I-gain)

Factory	Change during
setting	operation
0.0s	Y

This function sets an integral time.

0.	0			:		No integration
0.	1	to	9		9		9	: Integral time 0.1 to 999s

(in 0.1s step for 99.9s or less, 1s step for 100s or more)

H24 PID control (D-gain)

Factory	Change during
setting	operation
0.00s	Y

This function sets a derivative time.

0.	0	0			: No derivative
0.	0	1	to	1	0.	0	: Derivative time 0.01 to 10.0s (in 0.01s step)

H25 PID control (Feedback filter)

Factory Change during

setting operation

0.5s Y

This function sets a filter time constant of PID feedback.

0. 0 to 6 0. 0 : Time constants 0.0 to 60.0s (in 0.1s step)

-57-