GE C11, AF-300 manual Drive output capacity kVA at

2)	Single -phase 200V input series
		Item			Specifications
		Drive HP	1/8	1/4	1/2	1		2	3
Nominal applied motor			1/8	1/4	1/2	1		2	3
		*1 (HP)
	Rated output		0.28	0.56	1.0	1.6		2.8	4.0
ratings	capacity *2 (kVA)
	Voltage(V)		∙ 3-phase, 200V/50Hz, 200, 220, 230V/60Hz			(Proportional to input voltage)
Output	Rated current (A)		0.7	1.4	2.5	4.0		7.0	10.0
	Overload capacity		∙ 150% of rated current for 1 min.
	Rated frequency (Hz)		∙ 50, 60Hz
	Phases, Voltage, Fre-		∙ Single-phase	200 to 240V 50/60Hz
	quency
supply	Voltage/frequency		∙ Voltage: +10% to –10%, Frequency: +5% to –5%
	Capability for voltage
			∙ When the input voltage drops 165V or more, the drive can be operated continuously.
	variations
power	dip *3		When the input voltage drops below 165V from rated voltage, the drive can be operated
			for 15ms.
Input	Rated input current *6		1.2	2.0	3.5	6.5		11.8	17.7
		(with DCR)
			2.3	3.9	6.4	11.4		19.8	28.5
	(without DCR)
	Required power sup-		0.3	0.4	0.7	1.3		2.4	3.6
	ply capacity *4 (kVA)
Braking	Braking torque		150		100			50	30
		*5 (%)
	DC injection		∙ Starting frequency: 3Hz(fixed),		Braking current (0 to 100%),
	braking		Braking current ( 0 to 30%)
Protective structure			• Closed type IP20
(IEC60529)
Cooling method			• Self-cooling				• Fan cooling
Weight (Lb)			1.3	1.3	1.5	2.0		3.5	4.9
Notes:
*1 A 4-pole standard motor is assumed as a nominal applied motor.
*2		Drive output capacity (kVA) at 230V.
*3		When a momentary power failure occurs, while rated voltage is applied 85% of load of nominal motor is
		given.
*4		When an optional power-factor correcting DC reactor is used.
*5		Average braking torque where an unloaded motor decelerates and stops from 60Hz
		operation. (Varies according to the motor efficiency)
*6		The specification is calculated on assumption that the drive is connected to a 500 kVA-equivalent power
		transformer.
*7		The inter-phase imbalance ratio (%) = ((Max. voltage) - (Min. voltage)) / (Average voltage among three
		phases) x 67

- 79-