Kenmore 385. 17624, 385. 17620 owner manual Automatic Buttonhole

Automatic Buttonhole (Continued)

(_) Guide slot

(_ Guide block

_) Buttonhole guide plate (_ Buttonhole temptate (_ Catch

(_) Setting mark (_ Gear

(_) Base plate

After you select a template (_ with the style and size of buttonhole, slide the template into the guide plate _). Pull the catch (_) toward you while sliding the template _ until the selected buttonhole is at the setting mark _. Insert the gear of base plate (_ into the guide slot of template _) and fit the guide block _) into the center of the guide slot.

Needle thread (_) Bobbin thread (_ Buttonhole foot

Gear

_) Slot Starting point

Attach the buttonhole foot (_. Adjust the position of gear _ so it is aligned with the starting point of the template {_). The lever can be used to change gear positions. Pull the bobbin thread up through the guide slot of the buttonhole guide plate by turning

the handwheel counterclockwise while holding the needle thread. Place the bobbin and needle threads

to the left side of the guide plate. Leave 3 to 4" (7 to 10 cm) of threads.

84