Convect (select models)
Convection uses a fan to circulate hot air evenly over, under and around the food. As a result, foods are evenly cooked and browned, often in shorter times, at lower temperatures and with the flexibility of using more than one rack at a time.
Notes:
•The oven control comes from the factory set for Auto Convect Conversion. When using Convect Bake and Convect Pastry enter the conventional baking temperature. The control automatically converts the temperature to 25° less than the conventional temperature.
•When using Convect Roast the temperature will not be automatically reduced. Enter the conventional roasting temperature and time. The control then lets you know when 75% of the time has elapsed and alerts you to check the food for doneness.
•To turn Auto Convect Conversion off, see page 26.
Convect Options
Cook & Hold and Delay options are available when convect cooking. See page 21 for information on how to program a Cook & Hold or Delay option.
CONVECT | CONVECT | CONVECT |
BAKE | ROAST | PASTRY |
|
|
|
Whole Chicken | Frozen Pie | |
Baking of | Whole Turkey | Turnovers |
Cookies/Biscuits | Vegetables | Cream Puffs |
Breads | Pork Roasts | Puff Pastry |
Casseroles | Beef Roasts |
|
Tarts/Tortes |
|
|
Cakes |
|
|
|
|
|
Convect Bake (select models)
To set Convect Bake:
1.Press the Convect pad.
2.Select CNVT BAKE using the Quickset pads.
3. Select the oven temperature using the Quickset pads
OR
Enter the desired temperature using the number pads. Press Enter pad to set.
•The temperature can be set from 195° F to 550° F degrees in 5° increments. If Auto Convect Conversion is turned off, you can set 170° F.
•After three seconds, the oven will begin to preheat. CNVT BAKE and PREHEAT will appear in the display along with 100° or the actual oven temperature, whichever is higher.
•The temperature in the display will increase in 1° increments until the oven reaches the preset temperature. Allow about 15 minutes for the oven to preheat.
•When the oven is preheated, the oven will beep and PREHEAT will turn off and CNVT BAKE will be displayed. AUTO will be displayed if Auto Convect Conversion feature is turned on.
•Place food in the oven.
4.At the end of cooking, turn the oven off by
pressing the CANCEL pad. Remove food from the oven. The oven will continue operating until the CANCEL pad is pressed.
Rapid Preheat (select models)
Use to decrease preheating time when using Bake or Convect Bake. Use for all foods when baking on one rack.
•After Bake or Convect Bake has been programmed and activated, press the Rapid Preheat pad.
•1 RACK ONLY will display, after 10 seconds the display will show RAPID and PREHEAT.
To return to Standard Preheat:
•Press Rapid Preheat pad again. This will provide standard preheat and PREHEAT and the selected function will be displayed.
Notes:
•For best results, use rack position 2 or 3 when using the Rapid Preheat option.
•For optimum baking and browning results, Rapid Preheat is not recommended when baking on multiple racks.
17