Installation
1Screw on the angle bracket for the flue duct. ¨
$
[
2Screw on brackets for the extractor hood hand- tight, max. 3 Nm. ©
% |
[ |
3Screw in threaded bolt, leaving it protruding out
| of the wall by 3/16" - 11/32" |
| |
& |
|
| |
| NJO |
| |
| NBY |
| |
|
| PP |
Attaching and aligning the appliance
1Initially remove the protective foil from the back of the appliance and, following installation, remove foil completely.
2When attaching the appliance, ensure that it engages firmly with the brackets. «
3Align the appliance horizontally by turning the
brackets. If required, the appliance can be moved to the right or left. ¬
' | ( |
| 19 |