Luxury Whirlpool Bath
General Operation Information
English
All bathtubs manufactured by Jacuzzi Luxury Bath are designed for “fill and drain,” which means the bathtub should be drained after each use and filled with fresh water by the next bather. This is a health precaution, as these bathtubs are not designed to hold water continuously like pools or spas.
Two control panel types are available for the Luxury Whirlpool series. Refer to details below:
•J4 Luxury Electronic Control Panel: Operational instructions for this panel is listed below.
•Optional J5 Luxury LCD Control Panel:
Operation instructions for this panel are outlined in the supplemental guide provided in your warranty pack. Refer to this document for complete operation details (P/N GU47000).
Close the drain and fill the bathtub until water is at least 1˝ to 2˝ (25mm to 51mm) above the highest jet (see water line indicated in the illustration). Do not turn on the whirlpool system at any time if the jets are not completely immersed in water. Running the whirlpool system when there is insufficient water in the bathtub could result in water spraying outside the bath area. Running the whirlpool system without water will damage the recirculating pump.
When exiting the bathtub, the water level will drop below the jets which could result in water being sprayed out of the unit. To prevent this, you must turn unit OFF before exiting bathtub.
J4 Control Panel
Main Menu | POWER |
J5 Control Panel
Fill to at least 1˝ to 2˝ above highest jet
Whirlpool Operation
ON: Press the jet button once to turn the whirlpool jets ON.
The whirlpool motor will be on high speed. The indicator lights at left will illuminate brightly.
OFF: Press the jet button a second time to turn the whirlpool jets OFF.
Jet
If in chromatherapy lighting mode (indicator lights to the left of the jet button are dim), you will need to press jet button once to resume whirlpool operation mode and then a second time to turn the whirlpool power off.
Page 16 | www.jacuzzi.com | Installation and Operation |